8S9128 SPRING Caterpillar parts
120G, 12G, 14G, 621, 637D, 641B, D4H, D5H
Rating:
Alternative (cross code) number:
CA8S9128
8S-9128
8S9128
CA8S9128
8S-9128
8S9128
Weight: 0.05 pounds 0 kg.
Information:
ACTUAL RATE
5.533
N/MM
FREE LENGTH
73.406
mm
OD
15.138
mm
SOLID LENGTH
44.704
mm
WIRE DIAMETER
2.184
mm
MOTOR GRADER, WHEEL TRACTOR,
Compatible equipment models: 8S9128:
Number on catalog scheme:
17
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 2
B 1U-9200 Lever Puller Hoist 1
C 1P-2420 Transmission Repair Stand 2
Illustration 1 g01447727
Illustration 2 g01447725
Slightly raise torque converter (1) to Install transfer gears (4).
Install torque converter (1). The weight of torque converter (1) is approximately 532 kg (1173 lb). Place torque converter (1) onto Tooling (B) (not shown).
Illustration 3 g01447723
Install bolts (3).
Illustration 4 g01447720
Install bolts (2).
Illustration 5 g01447719
Attach Tooling (A) to torque converter assembly (1).
Illustration 6 g01435372
Illustration 7 g01435343
Attach Tooling (A) and a suitable lifting device to torque converter assembly (2). Attach Tooling (B) to torque converter assembly (2). The weight of torque converter assembly (2) is approximately 1108 kg (2440 lb).
Remove torque converter assembly (1) from Tooling (C).
Rotate torque converter assembly (2) and place torque converter assembly (2) on the ground.
Remove Tooling (A), Tooling (B), and the suitable lifting devices.End By:
Connect the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Connect".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 2
B 1U-9200 Lever Puller Hoist 1
C 1P-2420 Transmission Repair Stand 2
Illustration 1 g01447727
Illustration 2 g01447725
Slightly raise torque converter (1) to Install transfer gears (4).
Install torque converter (1). The weight of torque converter (1) is approximately 532 kg (1173 lb). Place torque converter (1) onto Tooling (B) (not shown).
Illustration 3 g01447723
Install bolts (3).
Illustration 4 g01447720
Install bolts (2).
Illustration 5 g01447719
Attach Tooling (A) to torque converter assembly (1).
Illustration 6 g01435372
Illustration 7 g01435343
Attach Tooling (A) and a suitable lifting device to torque converter assembly (2). Attach Tooling (B) to torque converter assembly (2). The weight of torque converter assembly (2) is approximately 1108 kg (2440 lb).
Remove torque converter assembly (1) from Tooling (C).
Rotate torque converter assembly (2) and place torque converter assembly (2) on the ground.
Remove Tooling (A), Tooling (B), and the suitable lifting devices.End By:
Connect the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Connect".
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
621, 641, 650B, 651, 657, 657B, 666, 992, D4H, D5H
7T7428
SPRING
D4H, D5H
D4H, D5H
D4H, D5H
517, 561H, 561M, 7A, 910, 910E, 931B, 931C II, 933, 939, D3B, D3C II, D3C III, D4C III, D4H, D4H XL, D4HTSK II, D4HTSK III, D5C III, D5M, D7G, D7G2, D7H, D8H, D9G, D9L, IT12, IT12B
517, 527, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5HTSK II, D5M, D6M, D9R
1612627
SPRING
D4H, D4H XL, D4HTSK II
D4H, D4H XL, D4HTSK II
1470363
SPRING
933, 933C, D3C III, D3G, D4C III, D4G, D5G
933, 933C, D3C III, D3G, D4C III, D4G, D5G
1189135
SPRING
933, 933C, D3C III, D5C III
933, 933C, D3C III, D5C III
1184777
SPRING
933, D3C III, D4C III, D4G, D5C III
933, D3C III, D4C III, D4G, D5C III
D3C III, D3G, D4C III, D4G, D5C III, D5G, D6G, D6G2 LGP, D6G2 XL, D7G, D7G2
D4H, D5H
173B, 183B, 844, 844H, 844K, 854G, 854K, D10, D10N, D10R, D10T, D11N, D11R, D11T, D4H, D5H, D7G, D8K, D8L, D9H, D9L, D9N