8Y3356 SPRING Caterpillar parts
D3C II, D3C III, D4C III, D5C III
Rating:
Alternative (cross code) number:
CA8Y3356
8Y-3356
8Y3356
CA8Y3356
8Y-3356
8Y3356
Weight: 0.01 pounds 0 kg.
Information:
ACTUAL RATE
5.26
N/MM
FREE LENGTH
21.03
mm
OD
5
mm
SOLID LENGTH
13.06
mm
WIRE DIAMETER
.838
mm
TRACK-TYPE TRACTOR,
Number on catalog scheme:
11
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B FT2712 Guide Stud 2
C 7M-7456 Bearing Mount Compound 1
Always wear protective gloves when handling parts that have been heated.
Raise the temperature of the ring gear to a maximum temperature of 315 °C (599 °F). Position the ring gear with the part number toward the crankshaft. Install the ring gear on the flywheel. Allow the ring gear to cool. Use a soft hammer in order to seat the ring gear against the shoulder of the flywheel.
Illustration 1 g01010803
Install Tooling (A) on flywheel (2). Fasten a suitable lifting device to flywheel (2). The weight of the flywheel is approximately 41 kg (90 lb).
Place flywheel (2) on the crankshaft. Slide the flywheel over Tooling (B).
Apply Tooling (C) to the threads of bolts (1).
Install six of the eight bolts (1). Remove Tooling (B) from the end of the crankshaft and replace with the two remaining bolts. Tighten the bolts evenly to a torque of 300 40 N m (221 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B FT2712 Guide Stud 2
C 7M-7456 Bearing Mount Compound 1
Always wear protective gloves when handling parts that have been heated.
Raise the temperature of the ring gear to a maximum temperature of 315 °C (599 °F). Position the ring gear with the part number toward the crankshaft. Install the ring gear on the flywheel. Allow the ring gear to cool. Use a soft hammer in order to seat the ring gear against the shoulder of the flywheel.
Illustration 1 g01010803
Install Tooling (A) on flywheel (2). Fasten a suitable lifting device to flywheel (2). The weight of the flywheel is approximately 41 kg (90 lb).
Place flywheel (2) on the crankshaft. Slide the flywheel over Tooling (B).
Apply Tooling (C) to the threads of bolts (1).
Install six of the eight bolts (1). Remove Tooling (B) from the end of the crankshaft and replace with the two remaining bolts. Tighten the bolts evenly to a torque of 300 40 N m (221 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect" for the correct procedure.
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
245, 518, 518C, 528B, 530B, 950, D3C II, D4E, D4E SR, D5E, D6D, D6E, D6E SR, D6G, D6G SR
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 24H, 5130, 5130B, 517, 5230, 5230B, 527, 561M...
153, 320D FM, 322 FM L, 325 L, 330, 539, 613G, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 910, 918F, 924F, 931, 931B, 933, 933C, 935C I...
D3C III, D3G, D4C III, D4G, D5C III, D5G, D6G, D6G2 LGP, D6G2 XL, D7G, D7G2
725, 725C, 730, 730C, 735, 735B, 740, 740B, 776C, 776D, 777, 777D, 777F, 784B, 784C, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 910, 916, 926, 926A, 931B, 931C, 931C II, 933, 939,...
910, 916, 926, 926A, 931B, 931C, 931C II, 933, 939, D3C, D3C III, D4B, D4C, D4C III, D4H, D4HTSK II, D5C, D5C III, IT18B, IT28, IT28B
931C, 931C II, 933, 933C, D3B, D3C, D3C II, D3C III, D3G, D4C, D4C II, D4C III, D4G, PM-201, PM-565, PM-565B
931B, 933, 939, D3, D3B, D3C III, D4C III, D5C, D5C III
120G, 12G, 130G, 140G, 160G, 931B, 931C, 933, 939, D3C, D3C III, D4C III, D5C III
941, D3, D3B, D3C, D4C III, D4D, D4E
939, 939C, D5C, D5C III, D5G
939, 955H, D4E, D4E SR, D5C, D5C III
120G, 12G, 130G, 140G, 160G, 931B, 931C, 933, 939, D3C, D3C III, D4C III, D5C III
834B, 931B, 931C, 931C II, 933, 935B, 935C II, 939, 988B, 988F, 988F II, 992C, 992D, AD40, AD45, AD45B, AD55, AD55B, AE40, D3B, D3C, D3C II, D3C III, D4C, D4C II, D4C III, D5C, D5C III, R1700G, R2900,...
931B, 933, 939, D3, D3B, D3C III, D4C III, D5C, D5C III
8Y5678
SPRING
D3C, D3C II, D3C III, D4C, D4C III, D5C, D5C III
D3C, D3C II, D3C III, D4C, D4C III, D5C, D5C III
8Y5679
SPRING
D3C, D3C II, D3C III, D4C, D4C III, D5C, D5C III
D3C, D3C II, D3C III, D4C, D4C III, D5C, D5C III
D3C, D3C II, D3C III, D4C, D4C III, D5C, D5C III
1074430
SPRING
621F, 627F, 814F, 815F, 816F, 910E, 914G, 918F, 924F, 928F, 928G, 933, 938F, 938G, 939, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, 980C, 980F, 990, 990 II, D3C III, D4C III, D5C III, IT12B, IT14F...
621F, 627F, 814F, 815F, 816F, 910E, 914G, 918F, 924F, 928F, 928G, 933, 938F, 938G, 939, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, 980C, 980F, 990, 990 II, D3C III, D4C III, D5C III, IT12B, IT14F...
613C II, 613G, 933, 935C II, 939, D3C III, D4C III, D5C III, FB518, IT12B
1197119
SPRING
910G, CP-433E, CP-44, CP-56, CP-573E, CP-64, CS-433E, CS-44, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-68B, CS-74, CS-74B, D3C III, D3G, D4C, D4C III, D4G, D5C III, D5G, IT12B, IT14F
910G, CP-433E, CP-44, CP-56, CP-573E, CP-64, CS-433E, CS-44, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-68B, CS-74, CS-74B, D3C III, D3G, D4C, D4C III, D4G, D5C III, D5G, IT12B, IT14F
910E, 910G, D3C III, D4C, D4C III, D5C III, IT12B, IT14F
9T7640
SPRING
910E, 910G, D3C III, D3G, D4C, D4C III, D4G, D5C III, D5G, IT12B
910E, 910G, D3C III, D3G, D4C, D4C III, D4G, D5C III, D5G, IT12B
D3C II, D3C III, D4C III, D5C III