9J5754 SPRING (outer) Caterpillar parts
173B, 183B, 844, 844H, 844K, 950 GC, 950H, 962H, 966H, 966M, 966M XE, 972H, 972M, 972M XE, 980M, 982M, 986H, D10N, D10R, D10T, D7G, D8K, D8L, D9H, D9L, D9N
Rating:
Alternative (cross code) number:
CA9J5754
9J-5754
9J5754
CA9J5754
9J-5754
9J5754
Weight: 0.03 pounds 0 kg.
Information:
ACTUAL RATE
5.5
N/MM
FREE LENGTH
50.5
mm
OD
15.09
mm
SOLID LENGTH
25.4
mm
WIRE DIAMETER
1.93
mm
HYDRAULIC CONTROL, WHEEL LOADER,
Compatible equipment models: 9J5754:
Number on catalog scheme:
4
For full view, you need register
Information:
Before lifting the machine, ensure that suitable lifting equipment is available and that the personnel are familiar with lifting work. The weight of the machine is shown on the rating plate, on the dimension drawing, and the packing list.While conducting any motor lifting operations, the following points must be observed:
Use only the lifting lugs or eyes intended for lifting the complete motor. Do not use any small additional lifting lugs or eyes available, as those lugs or eyes are only for service purposes.
The center of gravity of machines with the same frame may vary due to different outputs, mounting arrangements, and auxiliary equipment.
Check that eyebolts or the lifting lugs integrated with the machine frame are undamaged before lifting. Damaged lifting lugs must not be used.
Lifting eyebolts must be tightened before lifting. If needed, the position of the eyebolt must be adjusted with suitable washers.
Improper lift rigging can allow unit to tumble causing injury and damage.
Note: Do not lift the complete generating set by the generator lifting points.Unpack the equipment with care in order to avoid scratching painted surfaces. Move the unit to the mounting location. The unit can be moved by either of the following methods:
Attach an overhead crane to the eyebolts that are installed on the generator frame.
Use a lift truck in order to lift the generator.The hoist and the hoist cables should have a rating greater than the weight of the generator.Note: The machine weight can be found on the rating plate, dimension drawing, and the packing list.
Illustration 1 g06167175
Lifting the generator
Illustration 2 g06167182
Lifting the generator
Ensure that the machine is lifted from its frame. Do not lift the machine from the top cover.Always keep the generator in the horizontal position during lifting. Keeping the generator horizontal will reduce the risk of the rotor falling out if a single-bearing design.Note: A machine mounted on a pallet should be lifted by crane from the lifting eyes of the machine.
Use only the lifting lugs or eyes intended for lifting the complete motor. Do not use any small additional lifting lugs or eyes available, as those lugs or eyes are only for service purposes.
The center of gravity of machines with the same frame may vary due to different outputs, mounting arrangements, and auxiliary equipment.
Check that eyebolts or the lifting lugs integrated with the machine frame are undamaged before lifting. Damaged lifting lugs must not be used.
Lifting eyebolts must be tightened before lifting. If needed, the position of the eyebolt must be adjusted with suitable washers.
Improper lift rigging can allow unit to tumble causing injury and damage.
Note: Do not lift the complete generating set by the generator lifting points.Unpack the equipment with care in order to avoid scratching painted surfaces. Move the unit to the mounting location. The unit can be moved by either of the following methods:
Attach an overhead crane to the eyebolts that are installed on the generator frame.
Use a lift truck in order to lift the generator.The hoist and the hoist cables should have a rating greater than the weight of the generator.Note: The machine weight can be found on the rating plate, dimension drawing, and the packing list.
Illustration 1 g06167175
Lifting the generator
Illustration 2 g06167182
Lifting the generator
Ensure that the machine is lifted from its frame. Do not lift the machine from the top cover.Always keep the generator in the horizontal position during lifting. Keeping the generator horizontal will reduce the risk of the rotor falling out if a single-bearing design.Note: A machine mounted on a pallet should be lifted by crane from the lifting eyes of the machine.
Cat SIS web machinery list:
Parts spring Caterpillar catalog:
16, 525B, 525C, 535B, 535C, 545, 545C, 611, 613G, 615, 615C, 772, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G ...
16, 525B, 525C, 535B, 535C, 545, 545C, 611, 613G, 615, 615C, 772, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
613C, 621E, 631E, 641B, 657, 769C, 769D, 771C, 771D, 772, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777D, 784B, 785B, 789B, 793B, 793C, 920, 926, 930, 936F, 950, 950F, 950F II, 966C, 966D, 966F, 966F I...
530B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 825G, 918F, 924F, 928F, 938F, 938G, 938G II, 950B, 950B/950E, 950F, 950F II, 950G, 960F, 962G, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, ...
950 GC, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, IT62G, IT62G II, IT62H, R1300G, R1300G II
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 924G, 924GZ, 924H, 924HZ, 938H, 966M, 966M XE, 972M, 972M XE, IT38H
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE, IT38G II
16, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 826C, 834B, 836, 936, 950, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966F, 966F II, 966G, 966G II, 966H, 9...
24H, 814F, 815F, 816F, 824G, 825G, 826G, 844, 844H, 844K, 854G, 854K, 936F, 950F, 950F II, 960F, 966F, 966F II, 970F, 980F, 980F II, 980G, 980G II, 988F, 988F II, 990, 990 II, 990H, 990K, 992D, 992G, ...
824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 980C, 980F, 980F II, 980G, 980G II, 9...
824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 980C, 980F, 980F II, 980G, 980G II, 9...
173B, 183B, 844, 844H, 844K, D10N, D10R, D10T, D5H, D7G, D8K, D8L, D9H, D9L, D9N
173B, 183B, 844, 844H, 844K, D10N, D10R, D10T, D7G, D8K, D8L, D9H, D9L, D9N
4N5693
SPRING
D8H, D8K
D8H, D8K
227, 571G, 572G, 973, 977K, 977L, D7F, D7G, D7G2
6D0315
SPRING
14E, 931
14E, 931
6S7423
SPRING
931
931
1V5297
SPRING
955K, 955L
955K, 955L
0058012
SPRING
D4D, D5B, D6D
D4D, D5B, D6D
6S6833
SPRING
931, 931B
931, 931B
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
173B, 183B, D7G, D8K, D9H