9J8668 SPRING Caterpillar parts
943, 953, 963, 963B, 973
Rating:
Alternative (cross code) number:
CA9J8668
9J-8668
9J8668
CA9J8668
9J-8668
9J8668
Weight: 0.90 pounds 0 kg.
Information:
ACTUAL RATE
9.3
N/MM
FREE LENGTH
201.9
mm
OD
69.85
mm
SOLID LENGTH
57.9
mm
WIRE DIAMETER
6.35
mm
TRACK LOADER,
Number on catalog scheme:
2
For full view, you need register
Information:
Transmission, SPN 738 FMI 5Conditions Which Generate This Code:
Illustration 1 g01239004
Schematic of the transmission shift solenoid 5
This diagnostic trouble code is associated with the transmission solenoid valve 5. The FMI 5 means that the ECU has determined that an open in the circuit exists. The possible causes of this diagnostic trouble code are listed below:
The energize circuit of the solenoid is open.
The return circuit of the solenoid is open.
The solenoid has failed.
The ECU has failed. This is unlikely. Note: The following test procedure may create other diagnostic trouble codes. Ignore these created diagnostic trouble codes and clear these diagnostic trouble codes when the original diagnostic trouble code has been corrected. Ensure that the diagnostic trouble code of SPN 738 FMI 5 is active before performing this procedure.Note: Use a digital multimeter for the measurements in this procedure.System Response:All gears that are engaged by the solenoid are unavailable. The lockup clutch is turned OFF.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Disconnect the solenoid with the active diagnostic trouble code from the machine harness.
At the machine harness connector for the solenoid, place a jumper wire from contact 1 (wire 900-PU(Purple)) to contact 2 (wire 921-WH(White)).
Observe the status
Illustration 1 g01239004
Schematic of the transmission shift solenoid 5
This diagnostic trouble code is associated with the transmission solenoid valve 5. The FMI 5 means that the ECU has determined that an open in the circuit exists. The possible causes of this diagnostic trouble code are listed below:
The energize circuit of the solenoid is open.
The return circuit of the solenoid is open.
The solenoid has failed.
The ECU has failed. This is unlikely. Note: The following test procedure may create other diagnostic trouble codes. Ignore these created diagnostic trouble codes and clear these diagnostic trouble codes when the original diagnostic trouble code has been corrected. Ensure that the diagnostic trouble code of SPN 738 FMI 5 is active before performing this procedure.Note: Use a digital multimeter for the measurements in this procedure.System Response:All gears that are engaged by the solenoid are unavailable. The lockup clutch is turned OFF.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Disconnect the solenoid with the active diagnostic trouble code from the machine harness.
At the machine harness connector for the solenoid, place a jumper wire from contact 1 (wire 900-PU(Purple)) to contact 2 (wire 921-WH(White)).
Observe the status
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
215, 931B, 943, 953
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 24H, 5130, 5130B, 517, 5230, 5230B, 527, 561M...
973, 973C
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA, 651, 657, 82...
943, 953, 953B, 953C, 953D
963, D6C, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL
153, 163, 816, 844, 844H, 844K, 920, 930, 930R, 941, 943, 951B, D10, D10N, D10R, D10T, D5B, D5E, D6D, D6E, D6E SR, D8L, D9L, D9N
153, 163, 816, 914G, 920, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930, 930G, 930R, 938G II, 938H, 943, 950 GC, 950F II, 950G, 950G II, 953, 953B, 953C, 962G, 962G II, 966G, 966G II, 972G, 972G II...
163, 172, 183B, 518, 518C, 528, 528B, 530B, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 621, 621B, 627B, 631E, 631G, 633E II, 637D, 637E, 637G, 641B, 651E, 657E, 657G, 814, 814B, 814F, 814F II, 81...
950B, 963, 963B, 966D, 973, 980C
594, 594H, 953, 953B, 953C, D9G, D9H
920, 941, 943, 950, 953, 953C, 977K, 977L, 980B
953, 963, 963B, 973
943, 953, 963, 963B, 973
9J2004
SPRING-TORSION
943, 953, 963, 963B, 973
943, 953, 963, 963B, 973
953, 963, 963B, 973
933C, 939C, 943, 953, 963, 963B, 973, D3C III, D4C III, D5C III
933C, 939C, 943, 953, 963, 963B, 973, D3C III, D4C III, D5C III
2513353
SPRING-RECOIL
963B, 963C, 963D
963B, 963C, 963D
7P8288
SPRING
621B, 621E, 621F, 623E, 623F, 627E, 627F, 631D, 637D, 637E, 943, 953, 953B, 953C, 963, 963B, 973, IT12B, IT14G, IT18F, IT24F, IT28F
621B, 621E, 621F, 623E, 623F, 627E, 627F, 631D, 637D, 637E, 943, 953, 953B, 953C, 963, 963B, 973, IT12B, IT14G, IT18F, IT24F, IT28F
943, 953, 963, 963B
163, 172, 183B, 518, 518C, 528, 528B, 530B, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 621, 621B, 627B, 631E, 631G, 633E II, 637D, 637E, 637G, 641B, 651E, 657E, 657G, 814, 814B, 814F, 814F II, 81...
9J8669
SPRING
943, 953, 963, 963B, 973
943, 953, 963, 963B, 973
824G II, 824H, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 844, 844H, 854G, 854K, 943, 953, 963, 963B, 973, 988F, 988F II, 988G, 988H, 990, 990 II, 990H, 992D, 992G, 992K, 994, 994D, 994F