SPRING 9M5350 - Caterpillar

Identification
Path: Administration > General > Identification
Define the "Name" (the device name), "Location" (the physical location), and "Contact" (the person responsible for the device) used by InfraStruxure Central, InfraStruxure Manager, and the SNMP agent of the UPS Network Management Card (NMC). These settings are the values used for the MIB-II "sysName", "sysContact", and "sysLocation" Object Identifiers (OIDs).ReferenceFor more information about MIB-II OIDs, see the PowerNet®SNMP Management Information Base (MIB) Reference Guide.ReferenceThe "Name" and "Location" fields also identify the device when you register for the Remote Monitoring Service. Refer to the "Remote Monitoring Service" section in the, "Administration : Notification" for more information.Set the Date and Time
Mode
Path: Administration > General > Date & Time > mode
Set the time and date used by the NMC. You can change the current settings manually or through a Network Time Protocol (NTP) Server:
Manual Mode: Do one of the following:- Enter the date and time for the NMC.- Mark the check box "Apply Local Computer Time" to match the date and time settings of the computer you are using.
Synchronize with NTP Server: Have an NTP Server define the date and time for the NMC.Note: By default, any NMC on the private side of an InfraStruxure Central obtains the NMC time settings by using InfraStruxure Central as an NTP server.
Table 1
Setting    Definition    
Primary NTP Server     Enter the IP address or domain name of the primary NTP server.    
Secondary NTP Server     Enter the IP address or domain name of the secondary NTP server, when a secondary server is available.    
Time Zone     Select a time zone. The number of hours preceding each time zone in the list is the offset from Coordinated Universal Time (UTC), formerly Greenwich Mean Time.    
Update Interval     Define how often, in hours, the NMC accesses the NTP Server for an update. Minimum: 1, Maximum: 8760 (1 year).    
Update Using NTP Now     Initiate an immediate update of the date and time by the NTP Server.    Daylight Saving
Path: Administration > General > Date & Time > daylight saving
Enable traditional United States Daylight Saving Time (DST). Enable and configure a customized daylight saving time to match how Daylight Saving Time is implemented in your local area. DST is disabled by default.When customizing Daylight Saving Time (DST):
If the local DST always starts or ends on the fourth occurrence of a specific weekday of a month, choose "Fourth/Last". If a fifth Sunday occurs in that month in a subsequent year, the time setting still changes on the fourth Sunday.
If the local DST always starts or ends on the last occurrence of a specific weekday of a month, whether the last day is the fourth or the fifth occurrence, choose "Fifth/Last".Format
Path: Administration > General > Date & Time > date format
Select the numerical format in which to display all dates in this user interface. In the selections, each letter m (for month), d (for day), and y (for year) represents one digit. Single-digit days and months are displayed