SPRING 9P4239 - Caterpillar

9P4239 SPRING Caterpillar parts 769C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9P4239
9P-4239
9P4239

Weight: 0.010 pounds 0 kg.

Information:

ACTUAL RATE 1.656 N/MM

FREE LENGTH 73.914 mm

OD 14.275 mm

SOLID LENGTH 32.004 mm

WIRE DIAMETER 1.575 mm

Buy SPRING 9P4239 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 9P4239:

TRUCK 769C Caterpillar

Number on catalog scheme: 9

For full view, you need register

Information:

Illustration 1 g03707931Inspect the screen in the engine air precleaner that sits above the engine hood for dirt accumulation.Standard Precleaner
Illustration 2 g03350978
(1) Engine air precleaner cover
(2) Upper baffle and gasket
(3) Lower baffle
(4) Screen
(5) Screws
(6) Retainers
Loosen retainers (6) on the metal pipe. Remove retaining clamp on the scavenge hose (not shown).
Remove the engine air precleaner and turn the unit upside down.
Remove six screws (5) that hold the remaining components of the precleaner assembly together.
Disassemble the precleaner including the cover (1), upper baffle with gasket (2), lower baffle (3), and screen (4).
Clean all components with water or compressed air as needed.
Reassemble the precleaner assembly in reverse order. Unit has alignment guides to aide reassembly.
Add blue Loc-Tite to each long screw upon reassembly.
The gasket in top plate must be positioned properly upon reassembly.
Replace the engine air precleaner on the metal pipe. Install retaining clamps on precleaner and scavenge hose.Precleaner Assembly With Screen
Illustration 3 g06042629
Loosen the two screen retaining clamps (1) and (2) and slide the screen down the metal tube.
Illustration 4 g06042632
Loosen the precleaner retainer clamp (3) on metal pipe. Remove the retaining clamp on the scavenge hose (4).
Remove the engine air precleaner and turn the unit upside down.
Illustration 5 g06042642
Remove six screws (5) that hold the precleaner assembly together.
Disassemble the precleaner including the cover (8), upper baffle with gasket (7), and lower baffle (6).
Clean all components with water or compressed air as needed.
Reassemble the precleaner assembly in reverse order. Unit has alignment guides to aide reassembly.
Add blue Loc-Tite to each long screw upon reassembly.
The gasket in top plate must be positioned properly upon reassembly.
Replace the engine air precleaner on metal pipe. Install retaining clamps on precleaner and scavenge hose. Refer to Illustration 4.
Slide the screen back into position on the precleaner assembly. Reconnect the two clamps. Refer to Illustration 5.