0962144 SPROCKET Caterpillar parts
E70, E70B
Rating:
Alternative (cross code) number:
CA0962144
096-2144
0962144
CA0962144
096-2144
0962144
Weight: 60 pounds 27 kg.
EXCAVATOR,
You can buy:
US$332.33
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
0962144 Sprocket (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 66 lbs || Dimensions: 10-24.04-24.04 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 66 lbs || Dimensions: 10-24.04-24.04 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
ERMOZA Sprocket 096-2144 099-3015 1R-5440 for Caterpillar CAT Excavator E70 E70B
ERMOZA Part number：096-2144 || Application：for Caterpillar CAT Excavator E70 E70B
ERMOZA Part number：096-2144 || Application：for Caterpillar CAT Excavator E70 E70B
CARTEX Sprocket 096-2144 099-3015 1R-5440 for FITS Caterpillar FITS CAT Excavator E70 E70B
CARTEX Whether you're a professional mechanic or a DIY enthusiast,We've got you covered with a wide range of parts that meet the highest standards of quality and performance. || Order your High Quality Part with peace of mind, knowing we prioritize your satisfaction. Quality Parts, Superior Performance - it's not just a promise, it's our standard || QUESTIONS? : We at CARTEX - High Quality Parts USA has more than 40 years of experience in industry and has in-house technicians, If you are not sure if this part fits your machine or tractor, just send us an email before you make the purchase and our in house technicians will revert back to you, right away.
CARTEX Whether you're a professional mechanic or a DIY enthusiast,We've got you covered with a wide range of parts that meet the highest standards of quality and performance. || Order your High Quality Part with peace of mind, knowing we prioritize your satisfaction. Quality Parts, Superior Performance - it's not just a promise, it's our standard || QUESTIONS? : We at CARTEX - High Quality Parts USA has more than 40 years of experience in industry and has in-house technicians, If you are not sure if this part fits your machine or tractor, just send us an email before you make the purchase and our in house technicians will revert back to you, right away.
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 339-9354 Cap Kit 1
265-2256 Lint Free Wipes 1 Start By:
Remove the air inlet manifold.
Remove Install the flow limiters.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Do not open the high pressure fuel system without allowing the fuel system to purge. After the engine has shut down, allow the fuel system to purge for ten minutes. This operating fuel system contains high pressure. Exposure to high pressure fuel can result in personal injury.
Note: Do not remove all the quills at one time. To maintain alignment, leave a minimum of two quills attached to the fuel rail at all times. If necessary, replace with new quill.
Illustration 1 g01285837
Remove bolt (1) and the clamp from tube assembly (2) .
Illustration 2 g03348199
Illustration 3 g01443406
Note: Use Tooling (A) to cap tube assemblies, fittings, ports, and any opening in the fuel system to prevent contamination.
Disconnect tube assembly (3) and remove the bolts on tube assembly (2) . Remove bolts (5) . Disconnect tube assembly (4) . Remove tube assembly (2) and the O-ring seals. Remove bolts (6) .Note: If necessary, remove secondary fuel filter lines in order to remove tube assembly (2) .
Illustration 4 g01285008
Illustration 5 g01822394
Remove bolts (9) . Remove bolts (10) and bolts (11) . Repeat for the opposite side.
Remove tube assembly (7) . Remove tube assembly (8) and the O-ring seal.
Illustration 6 g01822395
Attach a suitable lifting device to fuel rail (13) . The weight of fuel rail (13) is approximately 60 kg (131 lb). Remove bolts (12) . Remove fuel rail (13) .
Place the high-pressure fuel rail on a clean surface. Support the rail so the weight is not resting on the quills. All openings should be capped or plugged to prevent contamination.
Repeat Steps 5 and 6 for the opposite side.Installation Procedure
Note: Carefully remove Tooling (A) to prevent contamination.
Illustration 7 g01822395
Attach a suitable lifting device onto fuel rail (13) . The weight of fuel rail (13) is approximately 60 kg (131 lb). Install fuel rail (13) . Install bolts (12) .
Illustration 8 g01443632
Tighten bolts (12) in the sequence that is shown in Illustration 8. Tighten bolts (12) to a torque of 100 20 N m (74 15 lb ft).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 339-9354 Cap Kit 1
265-2256 Lint Free Wipes 1 Start By:
Remove the air inlet manifold.
Remove Install the flow limiters.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Do not open the high pressure fuel system without allowing the fuel system to purge. After the engine has shut down, allow the fuel system to purge for ten minutes. This operating fuel system contains high pressure. Exposure to high pressure fuel can result in personal injury.
Note: Do not remove all the quills at one time. To maintain alignment, leave a minimum of two quills attached to the fuel rail at all times. If necessary, replace with new quill.
Illustration 1 g01285837
Remove bolt (1) and the clamp from tube assembly (2) .
Illustration 2 g03348199
Illustration 3 g01443406
Note: Use Tooling (A) to cap tube assemblies, fittings, ports, and any opening in the fuel system to prevent contamination.
Disconnect tube assembly (3) and remove the bolts on tube assembly (2) . Remove bolts (5) . Disconnect tube assembly (4) . Remove tube assembly (2) and the O-ring seals. Remove bolts (6) .Note: If necessary, remove secondary fuel filter lines in order to remove tube assembly (2) .
Illustration 4 g01285008
Illustration 5 g01822394
Remove bolts (9) . Remove bolts (10) and bolts (11) . Repeat for the opposite side.
Remove tube assembly (7) . Remove tube assembly (8) and the O-ring seal.
Illustration 6 g01822395
Attach a suitable lifting device to fuel rail (13) . The weight of fuel rail (13) is approximately 60 kg (131 lb). Remove bolts (12) . Remove fuel rail (13) .
Place the high-pressure fuel rail on a clean surface. Support the rail so the weight is not resting on the quills. All openings should be capped or plugged to prevent contamination.
Repeat Steps 5 and 6 for the opposite side.Installation Procedure
Note: Carefully remove Tooling (A) to prevent contamination.
Illustration 7 g01822395
Attach a suitable lifting device onto fuel rail (13) . The weight of fuel rail (13) is approximately 60 kg (131 lb). Install fuel rail (13) . Install bolts (12) .
Illustration 8 g01443632
Tighten bolts (12) in the sequence that is shown in Illustration 8. Tighten bolts (12) to a torque of 100 20 N m (74 15 lb ft).
Caterpillar parts catalog:
Parts sprocket Caterpillar catalog:
E70, E70B
E70B
E120B
E110B, E120B
0946133
SPROCKET
E450
E450
0993220
SPROCKET
E110
E110
0961479
SPROCKET
E110, E120
E110, E120
E300, E300B
3734606
SPROCKET
Caterpillar
Caterpillar
3734598
SPROCKET
Caterpillar
Caterpillar
4922996
SPROCKET AS
Caterpillar
Caterpillar
0134362
SPROCKET ASSEMBLY
Caterpillar
Caterpillar
E70B
E70, E70B