0993220 SPROCKET Caterpillar parts
E110
Rating:
Alternative (cross code) number:
CA0993220
099-3220
0993220
CA0993220
099-3220
0993220
Weight: 109 pounds 49 kg.
EXCAVATOR,
Compatible equipment models: 0993220:
Information:
Field Winding Continuity Test
Illustration 1 g00825532
Field Winding Continuity Test (6) Field winding leads
Remove the rear cover.
If the alternator has a capacitor, remove the capacitor.
Remove the regulator.
Connect the multimeter leads across field winding leads (6). This is shown in Illustration 1.
Measure the resistance between the field winding leads.Expected Results: M1 Series Alternators ... 9 0.1 ohms HDB Series Alternators ... 8.2 0.4 ohmsResults:OK - The resistance is within tolerance. The field winding is normal. STOP.NOT OK - The resistance is above tolerance. The field winding has an open circuit. Replace the field winding. STOP.NOT OK - The resistance is below tolerance. The field winding has a short circuit. Replace the field winding. STOP.Field Winding Ground Test
Illustration 2 g00825533
Field Winding Ground Test (6) Field winding leads (7) Rear frame
The rear cover, the capacitor, and the regulator remain removed from the alternator.
Connect the multimeter leads across rear frame (7) and one field winding lead (6). This is shown in Illustration 2.
Measure the resistance.Expected Result: The resistance is greater than 100000 ohms.Results:OK - The resistance is greater than 100000 ohms. Repeat steps 1 to 3 for the other field winding lead (6). If all of the results are OK, the stator is normal. STOP.NOT OK - The resistance is NOT greater than 100000 ohms. The field winding lead is shorted to the frame. Replace the field winding. STOP.
Illustration 1 g00825532
Field Winding Continuity Test (6) Field winding leads
Remove the rear cover.
If the alternator has a capacitor, remove the capacitor.
Remove the regulator.
Connect the multimeter leads across field winding leads (6). This is shown in Illustration 1.
Measure the resistance between the field winding leads.Expected Results: M1 Series Alternators ... 9 0.1 ohms HDB Series Alternators ... 8.2 0.4 ohmsResults:OK - The resistance is within tolerance. The field winding is normal. STOP.NOT OK - The resistance is above tolerance. The field winding has an open circuit. Replace the field winding. STOP.NOT OK - The resistance is below tolerance. The field winding has a short circuit. Replace the field winding. STOP.Field Winding Ground Test
Illustration 2 g00825533
Field Winding Ground Test (6) Field winding leads (7) Rear frame
The rear cover, the capacitor, and the regulator remain removed from the alternator.
Connect the multimeter leads across rear frame (7) and one field winding lead (6). This is shown in Illustration 2.
Measure the resistance.Expected Result: The resistance is greater than 100000 ohms.Results:OK - The resistance is greater than 100000 ohms. Repeat steps 1 to 3 for the other field winding lead (6). If all of the results are OK, the stator is normal. STOP.NOT OK - The resistance is NOT greater than 100000 ohms. The field winding lead is shorted to the frame. Replace the field winding. STOP.
Caterpillar parts catalog:
Parts sprocket Caterpillar catalog:
0961479
SPROCKET
E110, E120
E110, E120
0961479
SPROCKET
E110, E120
E110, E120
0994129
SPROCKET, DRIVE
E300, E300B
E300, E300B
0959779
SPROCKET, DRIVE
E240, E240C, EL240B
E240, E240C, EL240B
G27221900
SPROCKET
Caterpillar
Caterpillar
1R5440
SPROCKET
E70B
E70B
0993015
SPROCKET
E70, E70B
E70, E70B
0962144
SPROCKET
E70, E70B
E70, E70B
0990219
SPROCKET
E120B
E120B
0995350
SPROCKET
E110B, E120B
E110B, E120B
0946133
SPROCKET
E450
E450