SPROCKET 1919661 - Caterpillar

1919661 SPROCKET Caterpillar parts 216, 232B, 242B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1919661
191-9661
1919661

Weight: 21 pounds 9 kg.

Buy SPROCKET 1919661 Caterpillar genuine, new aftermarket tractor parts with delivery
SKID STEER LOADER,

Compatible equipment models: 1919661:

SKID STEER LOADER 216 232B 242B Caterpillar

Number on catalog scheme: 5

Caterpillar 1919661 Parts scheme SPROCKET

For full view, you need register

Information:

1. Remove bolts (1) from support retainer. 2. Install two 1/2" - 13 NC forcing screws (3) and remove retainer (2) from support. Remove O-ring seal from the retainer. 3. Fasten straps to the support (4) and remove it from the differential. The weight of the support is 204 kg (450 lb). 4. Put support (4) in position on the differential. 5. Install a new O-ring seal on retainer (2), then install retainer on the support with the bolts that hold it.End By:a. install rear axle housing (oscillating)Disassemble & Assemble Front Support
Start By:a. remove front support 1. Remove large O-ring seal (1) from front support bore. 2. Remove bearing (2) with a hammer and chisel.
Do not cause damage to bearing bore surface in front support.
3. Fasten a hoist and straps to the front support and put it in position in a press. 4. Install tooling (A) as shown and push bearing until it is against shoulder in front support. 5. Put clean oil on O-ring seal (1) and install it in support bore.End By:a. install front support