SPROCKET-CLA 2869821 - Caterpillar

Table 1
Lubricant Viscosities for Ambient Temperatures (1)    
Compartment or System    Oil Type and Classification    Oil Viscosities    °C    °F    
Min Max Min Max    
Engine Crankcase     Caterpillar Multigrade DEO
API CH-4 Multigrade
EMA LRG-1     SAE 15W40     -15     50     5     122    
Transmission     Caterpillar TDTO
Caterpillar TDTO-TMS
commercial TO-4     SAE 0W20 (2)     -40     22     -40     72    
SAE 0W30 (2) -40 30     -40     86    
SAE 5W30 (2) -30 30     -22     86    
SAE 10W -20 22     -4     72    
SAE 30 10 50     50     122    
TDTO-TMS (3) 10 50     50     122    
Hydraulic Systems     Caterpillar TDTO
commercial TO-4     SAE 10W     -20     50     -4     122    
Differentials and Final Drives     Caterpillar FDAO (4)
commercial TO-4     SAE 50 (5)     -10     32     14     90    
SAE 60 (5) -5 50     23     122    
( 1 ) When you are operating the machine in temperatures below -20°C (-4°F), refer to Operation and Maintenance Manual, SEBU5898, "Cold Weather Recommendations". This is available from your Caterpillar dealer.
( 2 ) First Choice: Oils of full synthetic base stock without viscosity index improvers that meet the performance requirements of the TO-4 specification for the SAE 30 viscosity grade. Typical lubricant viscosity grades are SAE 0W20, SAE 0W30, and SAE 5W30. Second Choice: Oils that contain a TO-4 additive package and a lubricant viscosity grade of SAE 0W20, SAE 0W30 and SAE 5W30.
( 3 ) TDTO-TMS Transmission Multi-Season (exceeds the TO-4/TO-4M multigrade specification requirements).
( 4 ) FDAO Final Drive and Axle Oil (exceeds the FD-1 specification requirements)
( 5 ) If the ambient temperature is below -15 °C (5 °F), warm up the oil prior to operation. The oil must be maintained to a temperature above -15 °C (5 °F) during operation. If the ambient temperature is below -15 °C (5 °F), perform the procedures in the Operation and Maintenance Manual, "Differential Warm-up" prior to operation. If the ambient temperature is below -25°C (-13°F), consult your Caterpillar dealer for instructions. Failure to warm up the oil prior to operation will cause damage to the machine.