SPROCKET 2K1265 - Caterpillar

Remove five bolts (62). Two bolts (62) are not shown.
Remove one bolt (63) and set bracket and harness assembly (64) to the side.
Remove shield (65).
Illustration 25 g06143837
Disconnect six rings (66) and remove shield (67).
Illustration 26 g06143856
Remove three bolts (69) and remove shield (70).
Illustration 27 g06143885
Disconnect six swivel nuts (71).
Illustration 28 g06143902
Loosen four nuts (72).
Remove four bolts (73) and remove bracket (74).
Disconnect nut (76).
Remove two bolts (77) and place tube assembly (75) out of the way.
Illustration 29 g06144189
Attach a suitable lifting device to the exhaust elbow bellows (79). The exhaust elbow bellows (79) weighs approximately 23 kg (51 lb).
Remove twelve bolts (78) and remove the exhaust elbow bellows (79). Four bolts (78) are not shown.
Illustration 30 g06144215
Remove three bolts (80) and remove shield (81).
Illustration 31 g06144224
Remove two bolts (82) and remove shield (83).
Illustration 32 g06144241
Remove four bolts (84) and remove shield (85).
Illustration 33 g06144271
Remove six bolts (86). One bolt (86) is not shown.
Remove shield (87).
Illustration 34 g06144314
Disconnect nut (88) and place tube (89) out of the way.
Remove six bolts (90). One bolt (90) is not shown.
Remove shield (91).
Illustration 35 g06144532
Remove four bolts (92). One bolt (92) is not shown.
Illustration 36 g06144564
Remove four bolts (93). One bolt (93) is not shown.
Disconnect nut (95) and set tube (94) out of the way.
Illustration 37 g06144644
Attach a suitable lifting device to the turbocharger assembly (96). The turbocharger assembly weighs approximately 102 kg (223 lb).
Remove twelve bolts (98).
Position tube (97) out of the way and remove the turbocharger assembly (96).
Illustration 38 g06144669
Attach a suitable lifting device to the turbocharger assembly (99). The turbocharger assembly weighs approximately 102 kg (223 lb).
Remove twelve bolts (100).
Position tube (101) out of the way and remove the turbocharger assembly (99).