SPROCKET-MOTOR 3455512 - Caterpillar

Table 1
Diagnostic Codes Table    
Code and Description    Conditions which Generate this Code    System Response    
248-9 @CatDatalinkLong@ not communicating     The battery voltage to the Electronic Control Module (ECM) has been above 9 VDC for the last two seconds.
The battery voltage to the ECM has been above 9 VDC for the last two seconds.
Communication was lost.     The ECM will log the diagnostic code.
All features that depend on the Cat Data Link will be disabled.    
562-9 Caterpillar Monitoring System abnormal update rate     The ECM has lost communications with the Monitoring System.     The diagnostic code is logged.
All features that depend on communications with the Monitoring System are disabled.    The Cat Data Link is a two wire electrical connection that is used for communication between electronic modules such as the engine Electronic Control Module (ECM), the machine ECM, electronic transmission controls, electronic dash displays, and Cat Electronic Technician (ET).The ECM communicates with display modules in order to share engine information and diagnostics for the electronic system.
Illustration 1 g01901153
SchematicTest Step 1. Inspect Electrical Connectors and Wiring
Remove electrical power from the ECM.
Illustration 2 g01139425
ECM (1) J1/P1connectors (1) J21/P1connectors
Thoroughly inspect ECM connector J1/P1 and machine connector J3/P3.