SPROCKET-TRACK 5G6082 - Caterpillar

Torque for nut on drive shaft ... 50 5 lb.ft.(70 7 N m)Rotation is clockwise when seen from drive end.Type of pump: Axial piston.For test, use SAE 10W oil at 150°F (65°C) Test at Full Speed:Output ... 20.0 U.S. gpm (76 liter/min)at pressure of ... 100 psi (690 kPa)with pump at ... 2000 rpmwith engine at ... 1800 rpmOutput ... 19.5 U.S. gpm (74 liter/min)at pressure of ... 1000 psi (6900 kPa)with pump at ... 2000 rpmwith engine at ... 1800 rpm Test at Half Speed:Output ... 10.0 U.S. gpm (38 liter/min)at pressure of ... 100 psi (690 kPa)with pump at ... 1000 rpmwith engine at ... 900 rpmOutput ... 9.6 U.S. gpm (36 liter/min)at pressure of ... 1000 psi (6900 kPa)with pump at ... 1000 rpmwith engine at ... 900 rpm(1) Torque for screws (four) ... 11 1 lb.ft.(15 1 N m)(2) Torque for bolts (four) ... 29 2 lb.ft.(40 3 N m) The arrow on the servo valve, with the four screws (1), must be in the same direction of rotation as the arrow on the plate of the pump.