SPROCKET 6I7230 - Caterpillar

6I7230 SPROCKET Caterpillar parts 5130, 5130B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6I7230
6I-7230
6I7230

Weight: 1443 pounds 654 kg.

Buy SPROCKET 6I7230 Caterpillar genuine, new aftermarket tractor parts with delivery
MINING EXCAVATOR,

Compatible equipment models: 6I7230:

MINING EXCAVATOR 5130 5130B Caterpillar

Number on catalog scheme: 1

Caterpillar 6I7230 Parts scheme SPROCKET

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00487412
Turn the crankshaft until two of the pistons are at the bottom center. Remove connecting rod nuts (1) from the connecting rod. Remove connecting rod cap (2) for each connecting rod.Note: The connecting rod bolts can fall out of the connecting rods when the connecting rod nuts are removed.
Remove the lower half of the connecting rod bearing from connecting rod cap (2) .
Carefully push the connecting rod into the cylinder liner for bearing removal. Remove the upper half of the connecting rod bearing from the connecting rod.
Repeat Steps 1 through 3 for the remaining connecting rod bearings.