SPROCKET 7D8817 - Caterpillar

Illustration 30 g02115764
Connect harness assemblies (16) and install the connecting hardware.
Illustration 31 g02116233
Connect hose assembly (15).
Illustration 32 g02115756
Connect hose assembly (14).
Illustration 33 g02111822
Connect hose assembly (12) and hose assembly (13).
Illustration 34 g02111829
Connect hose assembly (11).
Illustration 35 g02115714
Connect hose assembly (10).
Illustration 36 g02111824
Connect hose assembly (9).
Illustration 37 g02115638
Install tube assembly (8) and tube assembly (7).
Illustration 38 g02115378
Connect hose assembly (6) and hose assembly (5).
Illustration 39 g02114641
Connect hose assembly (4).
Illustration 40 g02111783
Use Tooling (A), Tooling (B), and a suitable lifting device to position the front of guard assembly (2). The weight of guard assembly (2) is approximately 272 kg (600 lb).
Illustration 41 g02111763
Illustration 42 g02111797
Use Tooling (A), Tooling (B), and a suitable lifting device to position the rear of guard assembly (2). The weight of guard assembly (2) is approximately 272 kg (600 lb).
Illustration 43 g02111777
Illustration 44 g02111832
Install guard assembly (2). Install bolts (3).
Illustration 45 g02111762
Install plate (1).
Fill the torque converter. Refer to Operation and Maintenance Manual, "Torque Converter and Transmission Oil - Change"End By:
Install the main drive shaft assembly