SPROCKET 8W8318 - Caterpillar

Illustration 1 g00315182
Schematic for the temperature sender (hydraulic oil)
Service Notes: Ensure that the desired diagnostic code is on hold. Ensure that the diagnostic code indicator shows "SERV CODE". The schematic that is shown above represents a typical installation of the component. Verify the connector contact and wire numbers by using the Electrical System Schematic for the machine that is being serviced. System Response:The CID-FMI is logged in memory. The CID-FMI may be viewed on a display module or the ET. The ECM flags hydraulic oil temperature as invalid data.Note: Go to Troubleshooting, "Temperature Sender" in order to troubleshoot this component. Test Step 1. Perform the following diagnostic procedure: "Temperature Sender"Results:
OK - STOP
REPAIRED, OK - STOP