STAND-ENGINE 1U9352 - Caterpillar

Removal Procedure
Start By:
Remove the hood.
Illustration 1 g06307726
Attach a suitable lifting device to support the rear end of engine (1). The weight of engine (1) is approximately 570 kg (1257 lb).
Illustration 2 g06307727
Remove bolts (3) and cover (2).
Illustration 3 g06307728
Some components are hidden for photographic purposes.
Remove bolt (4), washer (5), and washer (6). Repeat the same for the opposite side.
Raise the rear of the engine high enough to remove rear engine mounts (7).
Remove engine rear mounts (7). Repeat the same for the opposite side.Installation Procedure
Install engine rear mounts (7) in the reverse order of removal.
Tighten bolt (4) to a torque of 520 70 N.m (384 52 lb ft).