2I5988 STARTER Caterpillar parts
Rating:
Alternative (cross code) number:
CA2I5988
2I-5988
2I5988
CA2I5988
2I-5988
2I5988
Weight: 0.20 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New USA Built Starter Compatible with Baker, Caterpillar, Clark, Terex, Towmotor, White Lift Trucks, Continental F-163 Eng Replaces 1109422 4841605 115109 2I5988 3T5649 7N8404 8N1694 2355692 1998297
Gladiator 12 Volt 9 Tooth Wet Clutch 10MT High Torque || Meets or Exceeds OEM Specifications - One year Warranty! || Compatible References 3001010 3004585 2200071-46 201-10120 LRS01464 91-01-4232 1998297 10455332 1107308 1108508 1109087 12301471 88189 323-645 44-4911 91-01-4203 || 100% Assembled and Load Tested in the USA!
Gladiator 12 Volt 9 Tooth Wet Clutch 10MT High Torque || Meets or Exceeds OEM Specifications - One year Warranty! || Compatible References 3001010 3004585 2200071-46 201-10120 LRS01464 91-01-4232 1998297 10455332 1107308 1108508 1109087 12301471 88189 323-645 44-4911 91-01-4203 || 100% Assembled and Load Tested in the USA!
New USA Built Starter Compatible with Baker, Caterpillar, Clark, Terex, Towmotor, White Lift Trucks, Continental F-163 Eng Replaces 1109422 4841605 115109 2I5988 3T5649 7N8404 8N1694 2355692 1998297
Gladiator 12 Volt 9 Tooth Wet Clutch 10MT High Torque || Meets or Exceeds OEM Specifications - One year Warranty! || Compatible References 3001010 3004585 2200071-46 201-10120 LRS01464 91-01-4232 1998297 10455332 1107308 1108508 1109087 12301471 88189 323-645 44-4911 91-01-4203 || 100% Assembled and Load Tested in the USA!
Gladiator 12 Volt 9 Tooth Wet Clutch 10MT High Torque || Meets or Exceeds OEM Specifications - One year Warranty! || Compatible References 3001010 3004585 2200071-46 201-10120 LRS01464 91-01-4232 1998297 10455332 1107308 1108508 1109087 12301471 88189 323-645 44-4911 91-01-4203 || 100% Assembled and Load Tested in the USA!
Gladiator New USA Built Starter Cat Baker Continental Terex Forklifts T40 T60 FGD-30 Etc 1109422 4841605 115109 2I5988 3T5649 7N8404 8N1694 2355692
Gladiator Meets or exceeds OEM specifications || One year Warranty! || 100% Assembled and Load Tested in the USA! || 91-01-4232 1998297 10455332 1107308 1108508 1109087 12301471 323-645 44-4911 91-01-4203 1998263
Gladiator Meets or exceeds OEM specifications || One year Warranty! || 100% Assembled and Load Tested in the USA! || 91-01-4232 1998297 10455332 1107308 1108508 1109087 12301471 323-645 44-4911 91-01-4203 1998263
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If necessary, remove the OEM equipment from the rear power take-off (RPTO).
Illustration 1 g02069019
Illustration 2 g02069023
Remove bolts (1). Remove adapter (2) from flywheel housing (9). Remove O-ring seal (3) (not shown). Note: Make a temporary mark on the adapter and the flywheel housing in order to show the correct orientation of the adapter.
Remove bolts (4). Remove adapter (5) from flywheel housing (9). Remove O-ring seal (6) (not shown). Note: Make a temporary mark on the adapter and the flywheel housing in order to show the correct orientation of the adapter.
Remove gear (7) from crankshaft (8).
If necessary, follow Steps 9.a through Steps 9.c in order to remove the sleeve bearing from the adapter.
Place adapter (2) onto suitable support.
Use Tooling (A) and a suitable press in order to remove sleeve bearing (10) from adapter (2).
Repeat Steps 9.a through Step 9.b in order to remove the sleeve bearing from adapter (5).
Illustration 3 g02069020
Remove gear assembly (11) and gear assembly (12) from flywheel housing (9).
Illustration 4 g02069021
Remove bolts (13). Remove gear (17) and idler hub (15) from flywheel housing (9).
Remove bolts (14). Remove gear (18) and idler hub (16) from flywheel housing (9).
Illustration 5 g02069453
If necessary, follow Steps 9.a through Steps 9.c in order to remove the sleeve bearing from the gear.
Place gear (17) onto suitable support.
Use Tooling (A) and a suitable press in order to remove sleeve bearing (19) from gear (17).
Repeat Steps 9.a through Step 9.b in order to remove the sleeve bearing from the remaining gear.
Illustration 6 g02069024
If necessary, follow Steps 10.a through Steps 10.b in order to remove the sleeve bearing from the flywheel housing.
Use a suitable tool in order to remove sleeve bearing (20) from flywheel housing (9).
Repeat Step 10.a in order to remove sleeve bearing (21) from flywheel housing (9).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If necessary, remove the OEM equipment from the rear power take-off (RPTO).
Illustration 1 g02069019
Illustration 2 g02069023
Remove bolts (1). Remove adapter (2) from flywheel housing (9). Remove O-ring seal (3) (not shown). Note: Make a temporary mark on the adapter and the flywheel housing in order to show the correct orientation of the adapter.
Remove bolts (4). Remove adapter (5) from flywheel housing (9). Remove O-ring seal (6) (not shown). Note: Make a temporary mark on the adapter and the flywheel housing in order to show the correct orientation of the adapter.
Remove gear (7) from crankshaft (8).
If necessary, follow Steps 9.a through Steps 9.c in order to remove the sleeve bearing from the adapter.
Place adapter (2) onto suitable support.
Use Tooling (A) and a suitable press in order to remove sleeve bearing (10) from adapter (2).
Repeat Steps 9.a through Step 9.b in order to remove the sleeve bearing from adapter (5).
Illustration 3 g02069020
Remove gear assembly (11) and gear assembly (12) from flywheel housing (9).
Illustration 4 g02069021
Remove bolts (13). Remove gear (17) and idler hub (15) from flywheel housing (9).
Remove bolts (14). Remove gear (18) and idler hub (16) from flywheel housing (9).
Illustration 5 g02069453
If necessary, follow Steps 9.a through Steps 9.c in order to remove the sleeve bearing from the gear.
Place gear (17) onto suitable support.
Use Tooling (A) and a suitable press in order to remove sleeve bearing (19) from gear (17).
Repeat Steps 9.a through Step 9.b in order to remove the sleeve bearing from the remaining gear.
Illustration 6 g02069024
If necessary, follow Steps 10.a through Steps 10.b in order to remove the sleeve bearing from the flywheel housing.
Use a suitable tool in order to remove sleeve bearing (20) from flywheel housing (9).
Repeat Step 10.a in order to remove sleeve bearing (21) from flywheel housing (9).
Parts starter Caterpillar catalog:
2I5987
STARTER
Caterpillar
Caterpillar
2I5986
STARTER
Caterpillar
Caterpillar
2I5985
STARTER
Caterpillar
Caterpillar
2I5984
STARTER
Caterpillar
Caterpillar
2I5861
STARTER
Caterpillar
Caterpillar
2I2409
STARTER KIT
Caterpillar
Caterpillar
2I6050
STARTER REB
Caterpillar
Caterpillar
2I6049
STARTER REB
Caterpillar
Caterpillar
2I6048
STARTER REB
Caterpillar
Caterpillar
2I6047
STARTER REB
Caterpillar
Caterpillar
2I5992
STARTER REB
Caterpillar
Caterpillar
2I5989
STARTER
Caterpillar
Caterpillar