STARTER-MOTOR 5433363 - Caterpillar

Illustration 1 g06289341
Table 1
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 - - Assemble the stick cylinder so that the grease zerk is directed, as shown.
2 1 113-2963 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
3 2 504-7628 Sleeve Bearing(1) Bore before assembly is 120.259 0.040 mm (4.7346 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
4 2 166-1498 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 1 5I-3299 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
6 2 166-1496 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 504-7633 Sleeve Bearing(1) Bore before assembly is 100.217 0.040 mm (3.9455 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 2 504-7632 Sleeve Bearing (1) Bore before assembly is 70.17 0.04 mm (2.76 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
9 2 235-7679 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss.
(1) Assemble sleeve bearing so that end surface with groove faces the inside