STARTER 5620581 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     3    
B     1P-2420     Transmission Repair Stand     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.Note: Lubricate O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g01805517
Install O-ring seals (6) .
Illustration 2 g01804753
Use Tooling (A) and a suitable lifting device in order to install pump drive (5). The weight of pump drive (5) is approximately 31 kg (70 lb). Install bolts (4). Tighten bolts (4) to a torque of 100 20 N m (74 15 lb ft).
Illustration 3 g01804674
Install shield assembly (3) and install bolts (2). Tighten bolts 28 7 N m (21 5 lb ft).
Illustration 4 g01804644
Use Tooling (A) and a suitable lifting device in order to remove torque converter housing (1) from Tooling (B). The weight of torque converter (1) is approximately 134 kg (295 lb).End By:
Install the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Install".
Install the torque converter onto the transmission. Refer to Disassembly and Assembly, " Transmission and Torque Converter - Connect".