AVSPARE.COM
parts catalog

STARTER G-ELEC 8F2750 - Caterpillar


8F2750 STARTER G-ELEC Caterpillar parts
Rating:
51
Alternative (cross code) number:
CA8F2750
8F-2750
8F2750
Caterpillar 8F2750 STARTER G-ELEC
Weight: 0.05 pounds 0 kg.

Buy STARTER G-ELEC 8F2750 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 4 g01235926
Connect a lifting cable to the boom. Remove the bolts (7), retainers (8) and pins (9) on both sides of the support in order to remove the boom from the machine. Replace the pins in the supports. The approximate weight of the 28 foot boom is 1580 kg (3483 lb). Installation of Boom
Note: The line for the boom must be released in order to install the sheave block for the boom. The line for the load must be released in order to install the sheave block for the load.
Illustration 5 g01235936
Remove bolts (1), retainers (2), and pins (3) from the supports. Use an appropriate lifting device in order to install the boom to the supports. The approximate weight of the 28 foot boom is 1580 kg (3483 lb).
Illustration 6 g01235937
Install the bolts (1), retainers (2), and pins (3) to the support.
Raise the boom to the horizontal position. Use suitable wood blocks to support the boom.
Illustration 7 g01235929
Remove bolts (4), retainer (5), and pin (6) from the boom.
Illustration 8 g01235933
Use an appropriate lifting device in order to lift the sheave block to the boom. The approximate weight of the sheave block is 100.7 kg (222 lb). Use bolts (4), retainer (5), and pin (6) in order to install the sheave block to the boom.
Illustration 9 g01235935
Use an appropriate lifting device to lift the sheave block for the hook load line to the boom. The approximate weight of the sheave block for the hook load line is 263.0 kg (580 lb). Use pin (7), retainer (8), and bolts (9) in order to install the sheave block for the hook load line to the boom. Removal and Installation of Counterweight
Illustration 10 g02764398
Loosen lock bolt (1) in order to remove retaining rod at the front of the counterweight assembly. Remove the retaining rod.
Illustration 11 g02764096
Use an appropriate lifting device and remove the six counterweights from the frame. The weight of an individual counterweight is 689.3 kg (1520 lb).
Illustration 12 g01235938
Use an appropriate lifting device and remove the inside counterweight. The weight of the inside counterweight is 299.4 kg (660 lb).
Illustration 13 g02764496
Loosen the lock bolt (2) in order to remove the retaining rod at the rear of the counterweight assembly. Remove the retaining rod.
Illustration 14 g02765496
Use an appropriate lifting device and remove the five counterweights from the frame. The weight of an individual counterweight is approximately 614.2 kg (1354 lb).
Illustration 15 g01235939
Use an appropriate lifting device and remove the inside counterweight. The weight of the inside counterweight is approximately 299.4 kg (660 lb).
Perform steps 1 through 6 in reverse order in order to install the counterweights to the frame. Block Storage
Illustration 16 g02244333
Block horn on left side of the radiator guard
Store the two blocks on block horn (3) on front of radiator guard (4) when transporting the machine.


Parts starter Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.