STARTING MOTOR GP-AIR 2027866 - Caterpillar

Pedal
The pedal is the first pedal from the left.
Illustration 1 g03727683
Close - Push down on the front of the pedal in order to close the work tool.
Open - Push down on the rear of the pedal in order to open the work tool.Joystick
Joystick functions are configured by your Cat dealer. The active function of the joystick will be displayed on the monitor. Refer to Operation and Maintenance Manual, "Monitoring System". Contact your Cat dealer for additional information.Joystick Thumb Wheel
Illustration 2 g03727688
Close - Move the thumb wheel to the left in order to close the work tool.
Open - Move the thumb wheel to the right in order to open the work tool.Joystick Button
Illustration 3 g03727731
Close - Push the button on the left joystick left in order to close the work tool.
Open - Push the button on the right joystick in order to open the work tool.Work Tool Valves
Illustration 4 g02723306
(1) Stick
(2) Shutoff valves to the work tool The connections and shutoff valves are located on the stick. The shutoff valve (2) controls hydraulic oil flow to the work tool.Work Tool Control (2nd High Pressure Function) (If Equipped)
The following information pertains to work tools that require hydraulic oil flow in two directions. These work tools can also be equipped with a rotate circuit. For more information, refer to Operation and Maintenance Manual, "Joystick Controls" about the rotating circuit.Hydraulic shears, pulverizers, crushers, and grapples are examples of work tools that require hydraulic oil flow in two directions.
Illustration 5 g02723326
2nd High-pressure port A on the left side of the stick.
2nd High-pressure port B on the right side of the stick.
Joystick Thumb Wheel
To pressurize the second high-pressure Port A, move the slider on the joystick to the rightTo pressurize the second high-pressure Port B, move the slider on the joystick to the left.Joystick Button
To pressurize the second high-pressure Port A, push the button on the right joystick.To pressurize the second high-pressure Port B, push the button on the left joystick