STARTING MOTOR GP-ELECTRIC 2071555 - Caterpillar

Test Step 2. VERIFY THAT THE PL421 MODULE HAS NOT BEEN DISABLED.
AGo to the "Cellular Information" screen in Cat ET.BVerify that the "Cellular Network Coverage Status" is "In Coverage".Expected ResultThe "Cellular Network Coverage Status" module is "In Coverage", PL421 is reporting.Results
OK - The "Cellular Network Coverage Status" for PL421 is "In Coverage". Go to ""Test Step 4"".
NOT OK - The "Cellular Network Coverage Status" for PL421 is "Out of Coverage". Go to ""Test Step 4"".
NOT OK - The "Cellular Network Coverage Status" for PL421 is "Network Not Allowed".Test Step 3. VERIFY THAT THE PL421 IS RECEIVING CELLULAR SIGNALS.
AGo to the "Cellular Information" status screen in Cat ET.BVerify that the "Cellular Signal Quality" is greater than 25 percent.CVerify that the antenna is correctly installed.DVerify that the unit is in cellular map coverage of the provider.Expected ResultThe "Cellular Signal Quality" detected is greater than 25 percent.Results
OK - There is cell coverage in the area and the antenna is correctly installed. Proceed to ""Test Step 5"".
NOT OK - Either the unit is out of cell coverage or antenna is installed incorrectly. Verify that the unit is in cellular map coverage of the provider. Proceed to ""Test Step 7"" to check antenna installation.Test Step 4. VERIFY THAT THE PL421 MODULE IS CONFIGURED PROPERLY.
AGo to the "APN Configuration" screen.BVerify that the "APN Cellular Carrier" is configured to the correct cellular service provider.CVerify that the "APN Username" is configured to the correct cellular network. Refer to cellular provider for correct APN info.DVerify that the "APN Password" is configured with the correct password for cellular network. Refer to cellular provider for correct APN info.EVerify that the "APN SIM PIN" is configured with the correct SIM Card PIN. Refer to SIM Card Provider to determine and program SIM PIN.Expected ResultAll settings are correct.Results
OK - The PL421 is configured correctly. Proceed to ""Test Step 5"".
NOT OK – The PL421 is not configured correctly.RepairCorrect the configuration of the PL421. The "APN Configuration" can be verified in the "Cellular Network Coverage Status" within "GSM Information" of Cat ET.STOP.Test Step 6. CHECK THE INSTALLATION OF THE ANTENNA.
Observe installation of the antenna for the PL421. Verify that the antenna is installed with a clear view of the sky. The antenna must be in a location that is free from interference. Examples of interference include the following items:
Devices on the roof of the truck that could potentially be sources of radio frequency interference
Other antennas that are close to the antenna for the PL421.
The truck is inside a metal building or another similar structure
The truck is under large signs that are lighted
The truck is under power linesNote: Refer to ""Installation of the Antenna"" for additional details on optimal installation of the antenna.Expected ResultThe antenna is installed on the highest point on the truck. There is a clear view of the sky.Results
OK - The antenna for the PL421 is installed properly. Verify that all of the connections for the antenna are tight. Proceed to ""Test Step 8"".
NOT OK - The installation of the antenna