3240222 STARTING MOTOR GP-ELECTRIC Caterpillar parts
C2.2
Rating:
Alternative (cross code) number:
CA3240222
324-0222
3240222
CA3240222
324-0222
3240222
GENERATOR SET,
Compatible equipment models: 3240222:
Number on catalog scheme:
For full view, you need register
Information:
Caterpillar Products: All
3500B and 3500C Engines Engine: Commercial With Mechanical Unit Injector
3500An imbalance in the valve bridge's load can be caused by mismatched springs. The outboard valve stem acts as a pilot in the bridge's round hole in order to keep the bridge square with the system. If lower load springs are used on either valve, an imbalance on the bridge will result. The bridge will exert a load that bends the stem. The bridge will exert a load that may cause a failure on the stem at the keeper groove.Use the same springs on both valves under a common bridge.The retainer locks for the valves have recently changed in appearance. The retainer locks formerly had a flat, top edge. The new retainer locks have a top edge that is rounded. Although the retainer locks have a different appearances, the critical dimensions are the same. The old retainer locks and the new retainer locks can be used interchangeably. The retainer locks must be used in like pairs.The rotocoil assemblies must be used with the correct spring sets to ensure valve rotation.The 197-6999 Rotocoil Assembly must be used with the following springs.
101-1177 Spring
101-1180 Spring The 197-7062 Rotocoil Assembly must be used with the following springs.
194-4902 Spring
281-6157 Spring The 197-7063 Rotocoil Assembly must be used with the following springs.
194-4902 Spring
281-6157 Spring
3500B and 3500C Engines Engine: Commercial With Mechanical Unit Injector
3500An imbalance in the valve bridge's load can be caused by mismatched springs. The outboard valve stem acts as a pilot in the bridge's round hole in order to keep the bridge square with the system. If lower load springs are used on either valve, an imbalance on the bridge will result. The bridge will exert a load that bends the stem. The bridge will exert a load that may cause a failure on the stem at the keeper groove.Use the same springs on both valves under a common bridge.The retainer locks for the valves have recently changed in appearance. The retainer locks formerly had a flat, top edge. The new retainer locks have a top edge that is rounded. Although the retainer locks have a different appearances, the critical dimensions are the same. The old retainer locks and the new retainer locks can be used interchangeably. The retainer locks must be used in like pairs.The rotocoil assemblies must be used with the correct spring sets to ensure valve rotation.The 197-6999 Rotocoil Assembly must be used with the following springs.
101-1177 Spring
101-1180 Spring The 197-7062 Rotocoil Assembly must be used with the following springs.
194-4902 Spring
281-6157 Spring The 197-7063 Rotocoil Assembly must be used with the following springs.
194-4902 Spring
281-6157 Spring
Caterpillar SIS machinery equipment:
Parts starting Caterpillar catalog:
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013, 3013C, 3014, 3024, 3024C, AP-255E, BB-621C, C1.5, C2.2, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-34, CB34B, CB34B XW, CC34B
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013, 3013C, 3014, 3024, 3024C, BB-621C, C1.5, C2.2, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-335D, CB-34
3013, 3013C, 3014, 3024, 3024C, C1.5, C2.2, CB-334D, CB-334E, CB-335D
216, 216B, 226B, 232B, 242B, 247B, 257B, 3013, 3013C, 3024, 3024C, C1.5, C2.2, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-34, CB32B
2434341
STARTING MOTOR GP-ELECTRIC
C1.5, C2.2
C1.5, C2.2
3240223
STARTING MOTOR GP-ELECTRIC
C1.5, C2.2
C1.5, C2.2
2434342
STARTING MOTOR GP-ELECTRIC
C1.5, C2.2
C1.5, C2.2
3613767
STARTING MOTOR GP-ELECTRIC
3003, 3011C, C1.1, CB-14
3003, 3011C, C1.1, CB-14
12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 1673C, 3208, 330, 3304, 3304B, 3306, 3306B, 330B L, 350, 515, 517, 518C, 525B, 525C, 527, 528B, ...
1527787
STARTING AID GP
3054, 312B L, 312C, 908, AP-800C, BG-225B, CB-534C, CB-535B, CP-433C, CP-433E, CS-431C, CS-433C, PF-290B, PS-200B, PS-300B, PS-360B, TH103, TH350B, TH355B, TH460B, TH62, TH63, TH82, TH83
3054, 312B L, 312C, 908, AP-800C, BG-225B, CB-534C, CB-535B, CP-433C, CP-433E, CS-431C, CS-433C, PF-290B, PS-200B, PS-300B, PS-360B, TH103, TH350B, TH355B, TH460B, TH62, TH63, TH82, TH83
3304, 3306, G3304, G3304B, G3306, G3306B
3013, 3013C, 3014, 3024, 3024C, C1.5, C2.2, CB-334D, CB-334E, CB-335D
4W5102
STARTING MOTOR GP-AIR
D379, D379A, D398, D398A, D399, G379, G398, G399
D379, D379A, D398, D398A, D399, G379, G398, G399
7W8759
STARTING MOTOR GP-ELECTRIC
3114, 3116, 3126, 3126B, AP-1000, AP-1050, C7, RT100
3114, 3116, 3126, 3126B, AP-1000, AP-1050, C7, RT100
3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, D4H, G3516
4P0915
STARTING MOTOR GP-ELECTRIC
545, 814F, 815F, 816F, 966F, 966F II, 966G, 970F, 972G
545, 814F, 815F, 816F, 966F, 966F II, 966G, 970F, 972G
3N0970
STARTING MOTOR GP-AIR
D399, G399
D399, G399