3534499 STARTING MOTOR GP-ELECTRIC Caterpillar parts
C9.3
Rating:
Alternative (cross code) number:
CA3534499
353-4499
3534499
CA3534499
353-4499
3534499
INDUSTRIAL ENGINE,
Compatible equipment models: 3534499:
Number on catalog scheme:
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1863 Retaining Ring Pliers 1
B 5P-0960 Grease Cartridge 1
Be sure that all of the internal parts of the rotary joint are thoroughly clean and free of dirt and debris.
Illustration 1 g00551208
Illustration 2 g00551416
Check the condition of seals (9) and O-ring seals (3) and (7). If the seals are damaged, use new parts for replacement.
Install nine seals (9) in housing (5). Install O-ring seal (7) in housing (5). Apply Tooling (B) on the seals.
Install new dust seal (6) in housing (5). Install dust seal (6) so that the lip is facing outward, as shown. Properly seat dust seal (6) in housing (5).
Do not damage the dust seal when installing the rotor into the housing.
Apply Tooling (B) on both ends of rotor (10). Be sure that there is grease on the rotor area that contacts dust seal (6) and O-ring (7). Install rotor (10) in housing (5).
Install spacer (4) on rotor (10) and in housing (5). Use Tooling (A) to install retaining ring (8) on rotor (10).
Apply Tooling (B) on O-ring seal (3). Install O-ring seal (3) in the top of housing (5).
Install cover (2) and four bolts (1) that hold cover (2) in place. End By:
Install the swivel. Refer to Disassembly and Assembly, "Swivel - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1863 Retaining Ring Pliers 1
B 5P-0960 Grease Cartridge 1
Be sure that all of the internal parts of the rotary joint are thoroughly clean and free of dirt and debris.
Illustration 1 g00551208
Illustration 2 g00551416
Check the condition of seals (9) and O-ring seals (3) and (7). If the seals are damaged, use new parts for replacement.
Install nine seals (9) in housing (5). Install O-ring seal (7) in housing (5). Apply Tooling (B) on the seals.
Install new dust seal (6) in housing (5). Install dust seal (6) so that the lip is facing outward, as shown. Properly seat dust seal (6) in housing (5).
Do not damage the dust seal when installing the rotor into the housing.
Apply Tooling (B) on both ends of rotor (10). Be sure that there is grease on the rotor area that contacts dust seal (6) and O-ring (7). Install rotor (10) in housing (5).
Install spacer (4) on rotor (10) and in housing (5). Use Tooling (A) to install retaining ring (8) on rotor (10).
Apply Tooling (B) on O-ring seal (3). Install O-ring seal (3) in the top of housing (5).
Install cover (2) and four bolts (1) that hold cover (2) in place. End By:
Install the swivel. Refer to Disassembly and Assembly, "Swivel - Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts starting Caterpillar catalog:
3116, 3126, 3126B, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 32...
C-9, C9, C9.3, CX31-C9I, TH31-E61
3196, 3406B, 3406E, 480, 75C, 75D, 85C, 85D, C-10, C-12, C-9, C11, C12, C13, C15, C18, C9, C9.3, CPT372, CX31-C13I, CX31-C18I, CX31-C9I, CX35-C18I, MTC735, SUF557, TH31-E61, TH35-C11I, TH35-C13I, TH35...
3176C, 3196, 3406B, 3406C, 3406E, C-10, C-12, C-9, C11, C12, C13, C15, C18, C9, C9.3, CPT372, CX31-C13I, CX31-C9I, SUF557, TH31-E61, TH35-C11I, TH35-C13I, TH35-C13T
1673C, 3208, 3304, 3306, 3306B, 65C, 70C, C-9, C9, C9.3, CX31-C9I, G3304, G3306, TH31-E61
C13, C9, C9.3, CX31-C13I, CX31-C9I, TH31-E61, TH35-C13I
3529933
STARTING MOTOR GP-ELECTRIC
C13, CX31-C13I
C13, CX31-C13I
3440302
STARTING MOTOR GP-ELECTRIC
C13, CX31-C13I
C13, CX31-C13I