STARTING MOTOR GP-ELECTRIC 3973616 - Caterpillar

Calibration of the System
Prepare the machine for calibration.
Connect 416-2006 Sonic Sensor Gp to one side of the machine.
Place tow point in mid position.
Place sonic sensor group behind the tow point, approximately 16 inches above the ground.
Make sensor selection and calibrate tow point valve.
Set the paver to the following conditions to calibrate:
Engine idling
In "PAVE" mode
Parking brake ON
Place screed in "FLOAT" mode by depressing the screed FLOAT button.
Carefully depress the propel lever trigger and place the propel lever forward.The calibration sequence screens will step the operator through the calibration procedure.Grade and Slope Sensor Select
To change a sensor, press a SENSOR icon.
Illustration 16 g03834822The "Sensor" page will appear. Press a SENSOR and the sensor will appear on the main page and configure.
Illustration 17 g03835066
View showing "Sensor" page with current sensor options
(A) "None"
(B) "Slope"
(C) "Contact Sensor"
(D) "Averaging Beam Sensors (3)"
(E) "Averaging Beam Sensors (2)"
(F) "Single Sonic Sensor Over Ground"
(G) "Single Sonic Sensor Over String Line"Note: "Single Sonic Sensor Over Ground" (F) is the necessary selection to calibrate.Grade and Slope Menus and Settings
To access "Grade and Slope" menus and change settings, press the MENU button on the top right corner of the page.
Illustration 18 g03674521The "Menu" page will appear.
Illustration 19 g03790363Operator Settings
To access "Operator Settings", press the OPERATOR SETTINGS button and the selection will highlight in yellow. The "Operator Settings" page will appear. Press and slide the scroll bar UP and DOWN to view all menu options.
Illustration 20 g03790368The current "Operator Settings" menu items are as follows:
Main Screen
USB Sync (if USB is inserted)
Beeper
Text Slider Bar
UnitsTo access a menu item, press the item and the item will highlight in yellow. The setting page of the item's will appear. Change a setting by pressing an option. The item will highlight in yellow. Press OK to set.Press the BACK button to return to the previous menu.Diagnostics
To access "Diagnostics" menus, press the DIAGNOSTICS button and the "Diagnostics" menu page will appear.
Illustration 21 g03790384Press a "Diagnostics" item to view and the selected item will highlight in yellow. The menu page of the item will appear. To view other items within a menu page, press the item and the selected item will highlight in yellow. Another screen will appear with additional information.Press the BACK button to return to the previous menu.Installation
To access "Installation" menu items, press the INSTALLATION button and the selected item will highlight in yellow.
Illustration 22 g03674540A "Caution" screen will appear stating, "Changing some settings can make the machine inoperable". Press the OK button to continue navigation to the "Installation" menu items, or press the BACK button to return to the previous page.
Illustration 23 g03790416The current "Installation" settings menu items are as follows:
Guidance Settings
Control Settings
Left Valve Calibration
Right Valve Calibration
Firmware Upgrade (if USB is inserted)
Option KeysPress and slide the scroll bar UP or DOWN to view menu items. To view information within the menus and submenus, press an item and the selected item will highlight in yellow. The settings page will appear.Change settings by pressing an option. The option will highlight in yellow. Press OK to set.Press the BACK button to return to the previous menu.Grade