4181141 STARTING MOTOR GP-ELECTRIC Caterpillar parts
C7.1
Rating:
Alternative (cross code) number:
CA4181141
418-1141
4181141
CA4181141
418-1141
4181141
GENERATOR SET,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$24.33
27 Mar 2018
APDTY: APDTY
APDTY 4181141 Water Pump Gasket
Meets Or Exceeds OEM Specs||Factory OEM Fit Form And Function
Meets Or Exceeds OEM Specs||Factory OEM Fit Form And Function
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 4181141:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1B-3573 Bolt 1
138-7575 Link Bracket 2
1F-7958 Full Nut 1
5P-8245 Hard Washer 2
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01332355
Lubricate O-ring seals (8) with the lubricant that is being sealed. Install O-ring seal (8) .
Illustration 2 g01332352
Illustration 3 g03018437
Note: Insure proper orientation of brake housings per side of machine. Improper orientation of brake housings could result in damage to cooling hoses and brake assemblies. Refer to illustration above.
Attach Tooling (A) to brake housing (6) in a manner allowing for proper orientation of brake housing onto spindle.
Illustration 4 g01332354
Attach Tooling (A) and a suitable lifting device to brake housing (6) . The weight of brake (6) is approximately 2491 N (560 lb). Install brake (6) .
Install nuts (7) . Tighten nuts (7) to a torque of 790 40 N m (583 30 lb ft). Remove Tooling (A) .
Illustration 5 g01332336
Install bolts (5) . Tighten bolts (5) to a torque of 300 15 N m (220 11 lb. ft.).
Illustration 6 g01332320
Connect hose assembly (1) . Connect hose assembly (4) . Connect hose assembly (3) . Install bolts (2) .End By: Install the wheel, the wheel bearings and the Duo-Cone seals. Refer to Disassembly and Assembly, "Front, Wheel Bearings, and Duo-Cone Seals - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1B-3573 Bolt 1
138-7575 Link Bracket 2
1F-7958 Full Nut 1
5P-8245 Hard Washer 2
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01332355
Lubricate O-ring seals (8) with the lubricant that is being sealed. Install O-ring seal (8) .
Illustration 2 g01332352
Illustration 3 g03018437
Note: Insure proper orientation of brake housings per side of machine. Improper orientation of brake housings could result in damage to cooling hoses and brake assemblies. Refer to illustration above.
Attach Tooling (A) to brake housing (6) in a manner allowing for proper orientation of brake housing onto spindle.
Illustration 4 g01332354
Attach Tooling (A) and a suitable lifting device to brake housing (6) . The weight of brake (6) is approximately 2491 N (560 lb). Install brake (6) .
Install nuts (7) . Tighten nuts (7) to a torque of 790 40 N m (583 30 lb ft). Remove Tooling (A) .
Illustration 5 g01332336
Install bolts (5) . Tighten bolts (5) to a torque of 300 15 N m (220 11 lb. ft.).
Illustration 6 g01332320
Connect hose assembly (1) . Connect hose assembly (4) . Connect hose assembly (3) . Install bolts (2) .End By: Install the wheel, the wheel bearings and the Duo-Cone seals. Refer to Disassembly and Assembly, "Front, Wheel Bearings, and Duo-Cone Seals - Install".