4Q5454 STARTING MOTOR GP-PRELUB SYS Caterpillar parts
836
Rating:
Alternative (cross code) number:
CA4Q5454
4Q-5454
4Q5454
CA4Q5454
4Q-5454
4Q5454
Weight: 76 pounds 34 kg.
LANDFILL COMPACTOR,
Cross Reference:
CATERPILLAR
1249780,
4Q5454,
OR4998,
CUMMINS
3084198,
3603868PL,
3628757,
3628997,
DELCO REMY
10461188,
10479087,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
RAREELECTRICAL New 50Mt 24V 11T Starter Is Compatible With 10479087 0R4998 4Q5454 10038 Prelub Caterpillar Cummins 10461188 10R-0936 100138 100208 100237
Rareelectrical Rareelectrical Brand Compatible with CAT, CATERPILLAR, CUMMINS, DELCO. Please verify your OEM part number from your original unit to help ensure fitment. || Replaces: Caterpillar: 0R4998 4Q5454 1249780 10R-0936. / Cummins: 3603868Pl 3628757 3628997 / Delco: 10461188 10479087 / Rrelub: 100138 100203 100208 100234 100236 100237 100246 100273 100280 100282 100287 100867 / Item Description: Starter / Unit Type: Delco / Type: Dd / Voltage: 24 / Rotation: Clockwise / Tooth Count: 11 / Gear Od: 57.4Mm / 2.260In / Solenoid Position: 52 Degrees / Mounting Ear 1: 16Mm Id Unthreaded / Mounting Ear 2: 16Mm Id Unthreaded / Mounting Ear 3: 16Mm Id Unthreaded / || Applications: Please Verify Your Oem Part Number From Your Original Unit To Help Ensure Fitment. / Delco Prelub 50Mt Starter With Specifications: / 24 Volt Dd, Cw, 11 Teeth, With Out Prelub Pump On Rear || Applications: ... || Starter - Voltage: 24V Rotation: Clockwise Teeth On Drive / Splines: 11 Country Of Origin: CN Source: Aftermarket
Rareelectrical Rareelectrical Brand Compatible with CAT, CATERPILLAR, CUMMINS, DELCO. Please verify your OEM part number from your original unit to help ensure fitment. || Replaces: Caterpillar: 0R4998 4Q5454 1249780 10R-0936. / Cummins: 3603868Pl 3628757 3628997 / Delco: 10461188 10479087 / Rrelub: 100138 100203 100208 100234 100236 100237 100246 100273 100280 100282 100287 100867 / Item Description: Starter / Unit Type: Delco / Type: Dd / Voltage: 24 / Rotation: Clockwise / Tooth Count: 11 / Gear Od: 57.4Mm / 2.260In / Solenoid Position: 52 Degrees / Mounting Ear 1: 16Mm Id Unthreaded / Mounting Ear 2: 16Mm Id Unthreaded / Mounting Ear 3: 16Mm Id Unthreaded / || Applications: Please Verify Your Oem Part Number From Your Original Unit To Help Ensure Fitment. / Delco Prelub 50Mt Starter With Specifications: / 24 Volt Dd, Cw, 11 Teeth, With Out Prelub Pump On Rear || Applications: ... || Starter - Voltage: 24V Rotation: Clockwise Teeth On Drive / Splines: 11 Country Of Origin: CN Source: Aftermarket
STG91331 Starter Compatible with Cummins 3084198 3603868PL 3628757 3628997 0R4998 124-9780 4Q5454
KBERULAND STG91331 STARTER Compatible With CUMMINS 3084198 3603868PL 3628757 3628997 0R4998 124-9780 4Q5454
KBERULAND STG91331 STARTER Compatible With CUMMINS 3084198 3603868PL 3628757 3628997 0R4998 124-9780 4Q5454
RAREELECTRICAL New 50Mt 24V 11T Starter Compatible with 10479087 0R4998 4Q5454 10038 Prelub Caterpillar Cummins 10461188 10R-0936 100138 100208 100237
Rareelectrical Rareelectrical Brand Compatible with CAT, CATERPILLAR, CUMMINS, DELCO. Please verify your OEM part number from your original unit to help ensure fitment. || Replaces: Caterpillar: 0R4998 4Q5454 1249780 10R-0936. / Cummins: 3603868Pl 3628757 3628997 / Delco: 10461188 10479087 / Rrelub: 100138 100203 100208 100234 100236 100237 100246 100273 100280 100282 100287 100867 / Item Description: Starter / Unit Type: Delco / Type: Dd / Voltage: 24 / Rotation: Clockwise / Tooth Count: 11 / Gear Od: 57.4Mm / 2.260In / Solenoid Position: 52 Degrees / Mounting Ear 1: 16Mm Id Unthreaded / Mounting Ear 2: 16Mm Id Unthreaded / Mounting Ear 3: 16Mm Id Unthreaded / || Applications: Please Verify Your Oem Part Number From Your Original Unit To Help Ensure Fitment. / Delco Prelub 50Mt Starter With Specifications: / 24 Volt Dd, Cw, 11 Teeth, With Out Prelub Pump On Rear || Applications: ... || Starter - Voltage: 24V Rotation: Clockwise Teeth On Drive / Splines: 11 Country Of Origin: CN Source: Aftermarket
Rareelectrical Rareelectrical Brand Compatible with CAT, CATERPILLAR, CUMMINS, DELCO. Please verify your OEM part number from your original unit to help ensure fitment. || Replaces: Caterpillar: 0R4998 4Q5454 1249780 10R-0936. / Cummins: 3603868Pl 3628757 3628997 / Delco: 10461188 10479087 / Rrelub: 100138 100203 100208 100234 100236 100237 100246 100273 100280 100282 100287 100867 / Item Description: Starter / Unit Type: Delco / Type: Dd / Voltage: 24 / Rotation: Clockwise / Tooth Count: 11 / Gear Od: 57.4Mm / 2.260In / Solenoid Position: 52 Degrees / Mounting Ear 1: 16Mm Id Unthreaded / Mounting Ear 2: 16Mm Id Unthreaded / Mounting Ear 3: 16Mm Id Unthreaded / || Applications: Please Verify Your Oem Part Number From Your Original Unit To Help Ensure Fitment. / Delco Prelub 50Mt Starter With Specifications: / 24 Volt Dd, Cw, 11 Teeth, With Out Prelub Pump On Rear || Applications: ... || Starter - Voltage: 24V Rotation: Clockwise Teeth On Drive / Splines: 11 Country Of Origin: CN Source: Aftermarket
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 4Q5454:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1 Start By:
Remove the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Before you begin the removal of the valve springs, refer to Testing and Adjusting, RENR2416, "Valve Depth - Inspect" for appropriate information on the valve springs.
Ensure that the piston is at the top center position. Note: If the rocker arm assembly has been removed, use the following procedure in order to find the top center position. Go to Step 2 if the rocker arm assembly is installed.
Do not turn the crankshaft while the valve springs are removed.
Illustration 1 g00762206
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A).
Compress the valve springs in order to open the valve.
Turn the crankshaft until the piston touches the valve.
Continue to turn the crankshaft and release the pressure of Tooling (A) until the piston is at the top center position.
Illustration 2 g00762210
Install Tooling (A).
Compress valve springs (1). Remove valve keepers (2).
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Release the pressure on Tooling (A). Remove valve spring retainer (3) and valve springs (1). Note: If you are replacing all of the valve springs, the procedure can be done on two cylinders at the same time. The procedure can be done on cylinder 1 and cylinder 6, on cylinder 2 and cylinder 5, and on cylinder 3 and cylinder 4.
Do not turn the crankshaft while the valve springs are removed.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Place the new valve springs into position. Note: Ensure that the closed damper coils are toward the cylinder head if double valve springs are used.
Illustration 3 g00762210
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve spring retainer (3).
Install Tooling (A). Compress valve springs (1).
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Install valve keepers (2).
Release the pressure slowly on Tooling (A). Remove Tooling (A). Note: If you are replacing all of the valve springs the procedure can be done on two cylinders at the same time. The procedure can be done on cylinder 1 and cylinder 6, on cylinder 2 and cylinder 5, and on cylinder 3 and cylinder 4.End By:
Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1 Start By:
Remove the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Before you begin the removal of the valve springs, refer to Testing and Adjusting, RENR2416, "Valve Depth - Inspect" for appropriate information on the valve springs.
Ensure that the piston is at the top center position. Note: If the rocker arm assembly has been removed, use the following procedure in order to find the top center position. Go to Step 2 if the rocker arm assembly is installed.
Do not turn the crankshaft while the valve springs are removed.
Illustration 1 g00762206
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A).
Compress the valve springs in order to open the valve.
Turn the crankshaft until the piston touches the valve.
Continue to turn the crankshaft and release the pressure of Tooling (A) until the piston is at the top center position.
Illustration 2 g00762210
Install Tooling (A).
Compress valve springs (1). Remove valve keepers (2).
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Release the pressure on Tooling (A). Remove valve spring retainer (3) and valve springs (1). Note: If you are replacing all of the valve springs, the procedure can be done on two cylinders at the same time. The procedure can be done on cylinder 1 and cylinder 6, on cylinder 2 and cylinder 5, and on cylinder 3 and cylinder 4.
Do not turn the crankshaft while the valve springs are removed.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Place the new valve springs into position. Note: Ensure that the closed damper coils are toward the cylinder head if double valve springs are used.
Illustration 3 g00762210
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve spring retainer (3).
Install Tooling (A). Compress valve springs (1).
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Install valve keepers (2).
Release the pressure slowly on Tooling (A). Remove Tooling (A). Note: If you are replacing all of the valve springs the procedure can be done on two cylinders at the same time. The procedure can be done on cylinder 1 and cylinder 6, on cylinder 2 and cylinder 5, and on cylinder 3 and cylinder 4.End By:
Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts starting Caterpillar catalog:
24H, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 345C, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 5080, 5090B, 5110B, 725, 730, 824H, 825H, 826H, 834B, 834G, 834H, 836, 836G, 836H, 844...
1190, 120M, 1290T, 1390, 14M, 160M, 16H NA, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 3126B, 3176C, 3196, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D...
1190, 120M, 1290T, 140M, 14H, 14M, 160M, 16H NA, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 3176, 3176C, 3196, 330C, 330C L, 330D, 330D L, 336D, 336D L, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408...
1300472
STARTING AID GP-ETHER
834B, 836
834B, 836
836, 966F II, 980G, 992D, D7R II, D8R, D8R II
24H, 3176C, 3196, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 345B, 345B II, 345B II MH, 345B L, 345C, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3606, 3608, 365B, 365...
1128974
STARTING AID AR-ETHER
825G, 826G, 980G
825G, 826G, 980G
1382897
STARTING MOTOR GP-ELECTRIC
D250E, D250E II, D300E, D300E II
D250E, D250E II, D300E, D300E II
7U9746
STARTING AID GP-ETHER
D250E, D300D, D300E
D250E, D300D, D300E
1333390
STARTING AID GP
928G, IT28G
928G, IT28G
3118111
STARTING MOTOR GP-AIR
3516B, 3516C
3516B, 3516C
1435168
STARTING MOTOR GP-AIR
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C
1167994
STARTING AID GP-ETHER
3516B, PP3516
3516B, PP3516
1366338
STARTING AID GP-ETHER
854G, 992G
854G, 992G
1096911
STARTING AID GP-ETHER
854G, 992G
854G, 992G
1288809
STARTING AID GP-ETHER
988F II
988F II