STARTING MOTOR GROUP 8S0386 - Caterpillar

Inspect the machine for leaks. If leaks are observed, find the source of the leak and correct the leak. If leaks are suspected, check the fluid levels more frequently than the recommended intervals.
Inspect the cooling system for leaks and for faulty hoses. Fix any leaks and replace hoses, as needed. Remove any debris buildup from the radiator. For more information, refer to Operation and Maintenance Manual, "Radiator Core - Clean".
Inspect the engine compartment. Remove any debris buildup from the engine compartment. Clean the engine access doors.
Inspect the engine for any obvious component damage.
Inspect the precleaner bowl for dirt buildup. Clean the precleaner bowl if dirt has accumulated to the "FULL" mark. For more information, refer to Operation and Maintenance Manual, "Engine Air Precleaner - Clean".
Inspect the tires for damage. Replace any missing valve caps.
Inspect the axles, the differentials, the wheel brakes and the transmission for leaks. Fix any leaks.
Inspect the hydraulic system for leaks. Check the hydraulic tank, all hoses and all tubes. Also, check all plugs, all seals, all couplings and all fittings. Fix any leaks and replace hoses, as needed.
Inspect all attachments and the linkages for wear and for damage.
Make sure that all access doors, all access covers and all guards are secured. Inspect the access doors, the access covers and the guards for damage.
Inspect the steps, the walkways and the handholds. Remove any debris. Repair any damage or replace any damaged parts.
If equipped, inspect the automated lubrication system. Fix any leaks and replace any damaged fittings or hoses.
Inspect the Rollover Protective Structure (ROPS) for obvious damage. Consult your Caterpillar dealer for repairs.
Inspect the lights. Replace any broken bulbs and any broken lenses.
Inspect the operator compartment. Remove any trash buildup. Keep the operator compartment clean.
Inspect the dash panel for broken gauges and for broken indicator lights. Replace any broken parts.
Inspect the seat belt, the buckle and the mounting hardware. Replace any components that are worn or damaged. For more information, refer to Operation and Maintenance Manual, "Seat Belt - Replace".
Adjust the mirrors for best visibility.
Inspect the windows. Make sure that the operator's vision is not impaired by dust, by mud, or by other foreign materials. Clean the windows, if necessary. For more information, refer to Operation and Maintenance Manual, "Windows - Clean".