AVSPARE.COM
parts catalog

STATOR AS 1725691 - Caterpillar


1725691 STATOR AS Caterpillar parts 3412C, G3412
Rating:
65
Alternative (cross code) number:
CA1725691
172-5691
1725691
Caterpillar 1725691 STATOR AS

Buy STATOR AS 1725691 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 1725691:

GENERATOR SET  3412C   G3412   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 41 g01850642
Disconnect existing 147-8855 Hose As (83) from 6E-5397 Selector Valve Gp (84). Install new 147-8855 Hose As (85). Rotate the end of hose (85) that is a 90 degree elbow to 26 degrees. Install the 90 degree end of the new hose assembly to the 153-6241 Elbow As (86). Install 7K-1181 Cable Strap (87) around the hose assemblies.
Illustration 42 g01850680
Illustration 43 g01850681
Disconnect existing 177-3047 Hose As (88) and disconnect the 164-5557 Connector As (89). Install 164-5557 Connector As (89) onto 339-3313 Piston Pump Gp (11). Install 136-9354 Hose As (5) onto the machine.
Illustration 44 g01850694
Illustration 45 g01850695
Remove 7K-1181 Cable Strap (87) from the existing 136-2522 Hose As (90). Remove existing 136-2522 Hose As (90). Replace the 90 degree 115-6067 Coupling with a 45 degree 124-2130 Coupling . Install new 340-1571 Hose As (15). Install a 7K-1181 Cable Strap (87) around the hose assemblies. Reinstall the 4D-7733 Clip (91), 137-2104 Angle As (92) and 8T-4136 Bolt (93) onto the pump. Invert the clip and the bracket for correct orientation for the new hose.Note: The new hose is routed on the opposite side of the original hose.
Illustration 46 g01850739
Remove existing 8T-0040 Tube (94) and remove 7T-9271 One-Piece Flange (95).
Illustration 47 g06129378
Install new 340-7394 Tube As (20) and 6J-2680 O-Ring Seal (54). Use the existing 8T-4910 Bolts and 8T-4223 Hard Washers. Install 340-7392 Hose As (18) onto 340-7394 Tube As (20). Use two 8T-6703 Hose Clamps (2) to secure the hose.
Illustration 48 g06129464
Secure the 340-7392 Hose As (18) with 1P-4582 Half Flange (34) and the original hardware.
Illustration 49 g01850814
Install new 345-1044 Hose As (23). Install the 90 degree end of the hose to the transmission housing. install the other 90 degree coupling to 148-8355 Elbow As (96).
Illustration 50 g06129470
Install a 156-4283 Connector As (32) into the pump. Install the 90 degree coupling of the 340-7393 Hose As (19) at a 15 degree angle on the pump.

Caterpillar parts catalog:

Caterpillar parts catalog
G3412C Generator Set SPY00001-UP
3412C Generator Set 9EP00001-UP
3412E Generator Set BCW00001-UP
G3412 Generator Set KAP00001-UP
G3412 Generator Set R7A00001-UP
3412C Generator Set DJN00001-UP
3412C Generator Set TFT00001-UP


Parts stator Caterpillar catalog:

9G5578 STATOR AS
3116, 3126B, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C-10, C-12, C-1...
1086949 STATOR-EXCITER
3406C, 3412, 3412C, C15, C18, C27, G3408, G3412, PM3412
1090037 STATOR-EXCITER
3412, 3412C, C15, C18, G3408, G3412, PM3412
1725690 STATOR AS
3412C, C27, G3412
1725689 STATOR AS
3412C, C27, G3412
1725688 STATOR AS
3412C, C27, G3412
1725687 STATOR AS
3412C, C27, G3412
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.