STATOR GP-MAIN 2184904 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03154759
Disconnect harness assembly(not shown).
Remove fuel temperature sensor (1) from the fuel manifold (2).
Remove the O-ring seal from fuel temperature sensor (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g03155017
Install a new O-ring seal on fuel temperature sensor (1).
Install fuel temperature sensor (1) and tighten to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly(not shown).