STATOR AS 4571361 - Caterpillar

Insert the other end of the bracket assembly (24) onto the shaft on the position sensor (23) with the flat side of the shaft facing down, as shown in Illustration 27. Insert spring pin (22) into the driver on the bracket assembly (24) and through the shaft of position sensor (23) .
Illustration 29 g03725566
Insert bracket (26) to the free end of rod (25). Orient the flange on the bracket as shown in Illustration 29. Secure using one hard washer (6) and one nut (3). Tighten the nut to 15 3 N m (11 2 lb ft).Machine Configuration
The 422-3362 Self Level Kit is a premium feature that must be configured using the Caterpillar Electronic Technician (CAT ET).
Connect the CAT ET Tool to the machine. Turn the start key to the ON position. Do not start the engine.
Start the CAT ET software and select the machine "ECM".
Illustration 30 g03687424
Illustration 31 g03687425
From the menu select "Service", "Configuration", "Self Level". Alternatively, press F5 or click