STATOR AS 4P3367 - Caterpillar

Illustration 2 g01622566
(1) Lock pin (A) One-way flow (B) Locked (C) Two-way flowIn order to use the work tool, remove lock pin (1) from LOCKED position (B) and place lock pin (1) in UNLOCKED position (A) or (C) .When you are not using the work tool, put lock pin (1) in LOCKED position (B) on both the left pedal (if equipped) and the right pedal (if equipped). This will lock the pedals in order to help prevent any unexpected operation of the work tool.
Illustration 3 g01622575
(1) Lock pin (2) Pin (3) NotchNote: To prevent lock pin (1) from being accidentally pulled out, insert pin (2) through notch (3). Turn lock pin (1) counterclockwise by 1/4 turn. Repeat for the other pedal, if equipped.One-way Flow
The following information pertains to work tools that require hydraulic oil flow in one direction. Hydraulic hammers are an example of work tools that require hydraulic oil flow in one direction.Note: Make sure that the lock pin is in the one-way flow position.
Illustration 4 g01622588
Variable Speed - Push down on the front of the pedal in order to activate the work tool. Push the pedal further in order to increase the speed of the work tool. Release the pedal in order to turn off the work tool. Two-way Flow
The following information pertains to work tools that require hydraulic oil flow in two directions. These work tools can also be equipped with a rotate circuit. Hydraulic shears, pulverizers, crushers, and grapples are examples of work tools that require hydraulic oil flow in two directions.Note: Make sure that the lock pin is in the two-way flow position.
Illustration 5 g01622577
(4) Close - Push down on the front of the pedal in order to close the work tool.
(5) Open - Push down on the rear of the pedal in order to open the work tool. Operation with Two Pedals
Illustration 6 g01623786
(6) OPEN - Push down on the front of the left pedal in order to open the work tool.
(7) CLOSE - Push down on the front of the right pedal in order to close the work tool.
Illustration 7 g01623788
Right pedal
Illustration 8 g01623789
Left pedal
(8) OPEN - Push down on the rear of the right pedal in order to open the work tool.
(9) CLOSE - Push down on the front of the right pedal in order to close the work tool.
(10) ROTATE CLOCKWISE - Push down on the front of the left pedal in order to rotate the work tool clockwise.
(11) ROTATE COUNTERCLOCKWISE - Push down on the rear of the left pedal in order to rotate the work tool counterclockwise.