STATOR-EXCITER 5029722 - Caterpillar

HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Mitsubishi Joystick Pattern
Illustration 3 g06349078
BOOM LOWER (1) - Move the joystick to this position to lower the boom.
BUCKET CLOSE (2) - Move the joystick to this position to close the bucket or the work tool.
BOOM RAISE (3) - Move the joystick to this position to raise the boom.
BUCKET DUMP (4) - Move the joystick to this position to dump the bucket or the work tool.HOLD (5) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
STICK IN (6) - Move the joystick to this position to move the stick inward.
SWING RIGHT (7) - Move the joystick to this position to swing the upper structure to the right.
STICK OUT (8) - Move the joystick to this position to move the stick outward.
SWING LEFT (9) - Move the joystick to this position to swing the upper structure to the left.HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Shin-Ko Joystick Pattern
Illustration 4 g06349078
BOOM LOWER (1) - Move the joystick to this position to lower the boom.
BUCKET CLOSE (2) - Move the joystick to this position to close the bucket or the work tool.
BOOM RAISE (3) - Move the joystick to this position to raise the boom.
BUCKET DUMP (4) - Move the joystick to this position to dump the bucket or the work tool.HOLD (5) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
STICK OUT (6) - Move the joystick to this position to move the stick outward.
SWING RIGHT (7) - Move the joystick to this position to swing the upper structure to the right.
STICK IN (8) - Move the joystick to this position to move the stick inward.
SWING LEFT (9) - Move the joystick to this position to swing the upper structure to the left.HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.