STATOR AS 7C4545 - Caterpillar

7C4545 STATOR AS Caterpillar parts D398B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7C4545
7C-4545
7C4545

Weight: 0.01 pounds 0 kg.

Buy STATOR AS 7C4545 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE,

Compatible equipment models: 7C4545:

GEN SET ENGINE D398B Caterpillar

Number on catalog scheme: 10

Caterpillar 7C4545 Parts scheme STATOR AS

For full view, you need register

Information:

Clockwise Rotation
Illustration 1 g01625193
Medium pressure (rotator system) (1) Solenoid valve (2) Rotator motor (3) Line relief valves (4) Control valve (5) Dump valve (6) Main relief valve (7) Retract solenoid valve "A3" (8) Extend solenoid valve "A3" (9) Line (10) Line (11) Pilot manifold (12) Auxiliary pump (13) Return filter (14) Hydraulic tank (15) Pilot pumpOperation
Pilot pump (15) supplies oil to pilot manifold (11). When the hydraulic activation lever is moved to the UNLOCK position, pilot oil flows from pilot manifold (11) to solenoid valves: (7) and (8) .When the device for activation is pressed, the machine ECM sends a signal to retract solenoid (7) for the auxiliary control valve (4). Pilot oil flows to the top of the auxiliary control valve (4). The pilot oil will shift the control valve spool to the DOWNWARD position. This allows oil from auxiliary pump (12) to flow through auxiliary control valve (4) to rotator motor (2) for clockwise rotation. Return oil flows back through auxiliary control valve (4) and back to hydraulic tank (14). The working pressure for rotation is limited by main relief valve (6) .When the hydraulic circuit for the rotator is not active oil from the auxiliary pump flows to dump valve (5). The oil then flows through line (9) to hydraulic tank (14) .Counterclockwise Rotation
Illustration 2 g01625286
Operation
Pilot pump (15) supplies oil to pilot manifold (11). When the hydraulic activation lever is moved to the UNLOCK position, pilot oil flows from pilot manifold (11) to solenoid valves: (7) and (8) .When the device for activation is pressed for the opposite direction of flow, the machine ECM sends a signal to extend solenoid (8) for the auxiliary control valve (4). Pilot oil flows to the bottom of the auxiliary control valve (4). The pilot oil will shift the control valve spool to the UPWARD position. This allows oil from auxiliary pump (12) to flow through auxiliary control valve (4) to rotator motor (2) for counterclockwise rotation. Return oil flows back through auxiliary control valve (4) and back to hydraulic tank (14). The working pressure for rotation is limited by main relief valve (6) .When the hydraulic circuit for the rotator is not active oil from the auxiliary pump flows to dump valve (5). The oil then flows through line (9) to hydraulic tank (14) .