3401167 STEERING COLUMN GP-ADJUSTABLE Caterpillar parts
769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D
Rating:
Alternative (cross code) number:
CA3401167
340-1167
3401167
CA3401167
340-1167
3401167
Weight: 17 pounds 7 kg.
QUARRY TRUCK, TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Sunsong 3401167 Power Steering Pressure Line Hose Assembly
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong 3401167 Power Steering Pressure Line Hose Assembly
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong 3401167 Power Steering Pressure Line Hose Assembly
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
This part in 2 request:
Show.
This information for suppliers only!
2023-12-01
2017-09-14
Number on catalog scheme:
19
For full view, you need register
Compatible equipment models: 3401167:
Information:
All 280 kW (375 hp) And 317 kW (425 hp) 3208 ( 1Z ) Marine Engines So EquippedSUPPLEMENT: 03/05/90SERVICE MAGAZINE; OCTOBER 30, 1989; PAGE 12; "New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group" for All 280 kW (375 hp) And 317 kW (425 hp) 3208 (1Z) Marine Engines So Equipped.Change footnote1 to read "For MG507A," and footnote2 to read "For MG507".--------------- END SUPPLEMENT ---------------Description of Change: New MG507 and MG507A Marine Gear Groups are available for use on new 425 hp 3208 Engines and earlier 375 hp 3208 Engines. The three input gears of these marine transmissions now are shot-peened to improve the strength of the gears and the input shaft is splined instead of tapered due to the new coupling assembly. New marine transmission mounting groups are used with the new MG507 and MG507A Marine Gear Groups. The mounting group has a new coupling assembly that is used between the engine and transmission. The new coupling assembly reduces the torsional loads on the input shaft gear teeth.
These changes were made to correct field failures of input gears on 375 hp 3208 Engines and is required on all 425 hp 3208 Engines. The new coupling assembly is also effective in correcting low speed (low idle) noise complaints.
Adaptable To: The new marine gear groups identified in Chart A are to be used on all 425 hp 3208 Engines. The new marine gear groups can be used on 375 hp 3208 Engines that have input gear failures. The new 7E5480 or 7E5481 Marine Transmission Mounting Group must be used with the new marine gear groups. Earlier MG507 and MG507A Marine Gear Groups can be updated if the following components in Chart B are all used together and 3T2428 Bearing Support is reworked as shown in Illustration 3. See Illustrations 1 and 2.
Illustration 1. Location of components in marine transmission mounting group.
Illustration 2. Location of components in marine gear group - MG507 shown.
Illustration 3. Rework dimension for bearing support.
These changes were made to correct field failures of input gears on 375 hp 3208 Engines and is required on all 425 hp 3208 Engines. The new coupling assembly is also effective in correcting low speed (low idle) noise complaints.
Adaptable To: The new marine gear groups identified in Chart A are to be used on all 425 hp 3208 Engines. The new marine gear groups can be used on 375 hp 3208 Engines that have input gear failures. The new 7E5480 or 7E5481 Marine Transmission Mounting Group must be used with the new marine gear groups. Earlier MG507 and MG507A Marine Gear Groups can be updated if the following components in Chart B are all used together and 3T2428 Bearing Support is reworked as shown in Illustration 3. See Illustrations 1 and 2.
Illustration 1. Location of components in marine transmission mounting group.
Illustration 2. Location of components in marine gear group - MG507 shown.
Illustration 3. Rework dimension for bearing support.
Caterpillar SIS machinery equipment:
Caterpillar SIS
777E Off-Highway Truck KDP00001-UP (MACHINE) POWERED BY C32 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773E Off-Highway Truck PRB00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773E Off-Highway Truck DJS00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
777E Off-Highway Truck KDZ00001-UP (MACHINE) POWERED BY C32 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
785B Off-Highway Truck 6HK00001-UP (MACHINE) POWERED BY 3512 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
789B Off-HighwayTruck 7EK00001-UP (MACHINE) POWERED BY 3516 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
777D Truck 3PR00001-UP (MACHINE) POWERED BY 3508 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
793C Off-HighwayTruck 4AR00001-UP (MACHINE) POWERED BY 3516 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
769D Off-Highway Truck 5SS00001-UP (MACHINE) POWERED BY 3408E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773D Off-Highway Truck 7CS00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
771D Truck 6YS00001-UP (MACHINE) POWERED BY 3408E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
775D Quarry Truck 8AS00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
785C Off-HighwayTruck 1HW00001-UP (MACHINE) POWERED BY 3512B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
785C HAA Off-Highway Truck 5AZ00001-UP (MACHINE) POWERED BY 3516B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
784C Tractor 2PZ00001-UP (MACHINE) POWERED BY 3512 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
789C Off-Highway Truck 2BW00001-UP (MACHINE) POWERED BY 3516 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
793C Off-Highway Truck 4GZ00001-UP (MACHINE) POWERED BY 3516B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
776D Tractor AFS00001-UP (MACHINE) POWERED BY 3508B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
777D Off-Highway Truck AGC00001-UP (MACHINE) POWERED BY 3508B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
777D Truck AGY00001-UP (MACHINE) POWERED BY 3512B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
785C Off-Highway Truck APX00001-UP (MACHINE) POWERED BY 3512B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
793C Off-Highway Truck ATY00001-UP (MACHINE) POWERED BY 3516 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
769D Off-Highway Truck BBB00001-UP (MACHINE) POWERED BY 3408E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
771D Quarry Truck BCA00001-UP (MACHINE) POWERED BY 3408E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773E Off-Highway Truck BDA00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
775E Off-Highway Truck BEC00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
793D Off-Highway Truck FDB00001-UP (MACHINE) POWERED BY 3516B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
3508B Engine Emissions Repower Tier I For 777B And 777D Off-Highway Truck 2YW00001-UP (MACHINE) »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773D Off-Highway Truck NBJ00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
777D Off-Highway Truck FKR00001-UP (MACHINE) POWERED BY 3508B Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
785D Off-Highway Truck MSY00001-UP (MACHINE) POWERED BY 3512C Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773E Off-Highway Truck ASK00001-UP (MACHINE) »
340-1167
STEERING COLUMN GP-ADJUSTABLE
785D OEM Off-Highway Truck DMC00001-UP (MACHINE) POWERED BY 3512 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
789D Off-Highway Truck SPD00001-UP (MACHINE) POWERED BY 3516 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
C32 Engine Emissions Retrofit Repower Tier II for 777D Truck 3PR00001-UP (MACHINE) »
340-1167
STEERING COLUMN GP-ADJUSTABLE
789D XQ Off-Highway Truck SHH00001-UP (MACHINE) POWERED BY 3516 Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
773E Off-Highway Truck KEG00001-UP (MACHINE) POWERED BY 3412E Engine »
340-1167
STEERING COLUMN GP-ADJUSTABLE
3516 Engine Emissions Certified Rebuild Upgrade Retrofit Tier I Equivalent Level for 789 Off-Highway Truck 9ZC00001-UP (MACHINE) »
340-1167
STEERING COLUMN GP-ADJUSTABLE
3512B Engine Emissions Certified Rebuild Upgrade Retrofit Tier I Equivalent Level for 785 Off-Highway Truck 8GB00223-UP (MACHINE) »
340-1167
STEERING COLUMN GP-ADJUSTABLE
Caterpillar parts catalog:
Parts steering Caterpillar catalog:
1370019
STEERING GEAR GP
784C, 785, 785B, 785C, 785D
784C, 785, 785B, 785C, 785D
5T7629
STEERING GEAR GP
784B, 785, 785B
784B, 785, 785B
1791258
STEERING COLUMN GP
69D, 769D, 771D, 773D, 775D, 776D, 777D
69D, 769D, 771D, 773D, 775D, 776D, 777D
3635911
STEERING WHEEL AS
416D, 420D, 424B, 424B HD, 430D, 446D, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777F, 777G, 785B, 789B,...
416D, 420D, 424B, 424B HD, 430D, 446D, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777F, 777G, 785B, 789B,...
7I5539
STEERING WHEEL
611, 613C II, 613G, 615C, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631G, 637G, 657G, 773D, 773E, 777D, 784C, 785C, 785D, 789C, 793C, 793D, 793F, 795F AC, 797F
611, 613C II, 613G, 615C, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631G, 637G, 657G, 773D, 773E, 777D, 784C, 785C, 785D, 789C, 793C, 793D, 793F, 795F AC, 797F
3635912
STEERING WHEEL AS
611, 613C II, 613G, 615C, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 785, 785B, 785C, 785D, 789, 789B, ...
611, 613C II, 613G, 615C, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 785, 785B, 785C, 785D, 789, 789B, ...
1370770
STEERING WHEEL
631G, 637G, 69D, 769D, 771D, 773D, 775D, 776D, 777D, 797, AD30, AD45B, AD55, AD55B, AD60
631G, 637G, 69D, 769D, 771D, 773D, 775D, 776D, 777D, 797, AD30, AD45B, AD55, AD55B, AD60
769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 785, 785B, 789, 789B, 793B, 793C, AD40, AD45, AE40
769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 785, 785B, 789, 789B, 793B, 793C, AD40, AD45, AE40
5T9261
STEERING WHEEL
769C, 771C, 772B, 773B, 775B, 776C, 777, 777B, 784B, 785, 785B, 789, 789B, 793B, 793C, AD40, AD45, AE40, D250D, D25D, D300D, D40D
769C, 771C, 772B, 773B, 775B, 776C, 777, 777B, 784B, 785, 785B, 789, 789B, 793B, 793C, AD40, AD45, AE40, D250D, D25D, D300D, D40D
8W3729
STEERING COLUMN AS
784B, 785, 785B, 789, 789B, 793B, 793C, D250D, D250E, D25D, D300D, D300E, D350E, D400E, D40D
784B, 785, 785B, 789, 789B, 793B, 793C, D250D, D250E, D25D, D300D, D300E, D350E, D400E, D40D
2106592
STEERING COLUMN GP
769D, 771D, 773D, 775D, 776D, 777D, 784C, 785C, 785D, 789C, 793C, 793D
769D, 771D, 773D, 775D, 776D, 777D, 784C, 785C, 785D, 789C, 793C, 793D
4V1221
STEERING AR-SUPPLEMENTAL
926, 926A, G926, IT28, IT28B
926, 926A, G926, IT28, IT28B
8I2182
STEERING COLUMN GP-ADJUSTABLE
611, 613C II, 615C
611, 613C II, 615C
8D6901
STEERING GEAR GP
621, 621B, 621R, 623B, 627B
621, 621B, 621R, 623B, 627B
1808505
STEERING AR
R1700G
R1700G
8P5200
STEERING CLUTCH CONTROL GROUP
D6D, D6D SR
D6D, D6D SR
1454116
STEERING AR-SECONDARY
966G, 972G
966G, 972G