STEM AS.- 2112657 - Caterpillar

Illustration 1 g01250493
Lower the temperature of bearings (17). Use Tooling (J) in order to install bearings (17). Install bearings (17) to a depth of 10.0 1.0 mm (0.40 0.04 inch).
Illustration 2 g01250487
Use Tooling (H) in order to install lip seals (16) .
Illustration 3 g01250515
Lower the temperature of bearings (15). Use Tooling (G) in order to install bearings (15). Install bearings (11) (not shown) to a depth of 9.5 1.0 mm (0.37 0.04 inch).
Illustration 4 g01250517
Use Tooling (H) in order to install lip seals (14) .
Illustration 5 g01250020
Illustration 6 g01231521
Attach a suitable lifting device onto lift arm (6). The weight of lift arm (6) is approximately 7416 kg (16350 lb). Use the suitable lifting device in order to position lift arm (6) .
Illustration 7 g01250045
Use a suitable lifting device in order to install pin assembly (13). The weight of pin assembly (13) is approximately 77 kg (170 lb). Repeat for the opposite side.
Illustration 8 g01231429
Position plate (12) and install bolts (11). Repeat for the opposite side.
Illustration 9 g01231418
Illustration 10 g01231427
Use Tooling (B) in order to position cylinder assembly (7). Use a suitable lifting device in order to install pin (10). The weight of pin assembly (10) is approximately 45 kg (100 lb). Install collets (9). Install bolt (8). Repeat for the opposite side.
Illustration 11 g01231404
Connect hose assembly (5) .
Illustration 12 g01231400
Connect hose assembly (4). Connect hose assembly (3). Repeat for the opposite side.
Illustration 13 g01231387
Connect hose assembly (2) .
Illustration 14 g01231377
Use a suitable lifting device in order to lower tilt cylinder (1) .
Illustration 15 g01231409
Remove Tooling (A) from lift arm (6) .End By: Install the tilt lever. Refer to Disassembly and Assembly, "Tilt Lever - Install".