parts catalog

STEM AS-COLLET 4Z8154 - Caterpillar

4Z8154 STEM AS-COLLET Caterpillar parts STEM
Alternative (cross code) number:
Caterpillar 4Z8154 STEM AS-COLLET
Weight: 2 pounds 0 kg.

Buy STEM AS-COLLET 4Z8154 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0074 Slide Hammer Puller As. 1
B 439-3938 Lifting Eye Assembly 2 Start By:
Remove the transmission.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03817170
Remove retaining ring (1). Use Tooling (A) to remove pilot (2) and the O-ring seals.
Illustration 2 g03817171Note: Discard retaining ring (3) after removing.
Remove retaining ring (3). Remove plate (4).
Illustration 3 g06239612
Install Tooling (B) and a suitable lifting device to torque converter (5). The weight of torque converter (5) is approximately 95 kg (209 lb).
Illustration 4 g03817174
Remove torque converter (5).

Parts stem Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.