STEM A 5P1308 - Caterpillar

The seat has been removed for photographic reasons.1. Remove three truss head screws (1) and cover (2) from the ROPS. 2. Mark and identify two wire harnesses (4) for installation purposes. Remove two wire harnesses (4) from transmission electronic control (3). 3. Remove four bolts (5) and the washers. Set the grounding strap (not shown) aside and remove transmission electronic control (3) from the ROPS. The following steps are for the installation of the transmission electronic control.4. Put transmission electronic control (3) in position. Install the grounding strap, four bolts (5), and the washers to the ROPS.5. Install two wire harnesses (4) to transmission electronic control (3).6. Install cover (2) and three truss head screws (1) to the ROPS.