STEP AS 5199948 - Caterpillar

5199948 STEP AS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5199948
519-9948
5199948

Weight: 172 pounds 78 kg.

Buy STEP AS 5199948 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3

Caterpillar 5199948 Parts scheme STEP AS

For full view, you need register

Information:

The ends of the bellows are very sharp. Injury could occur if the bellows are not handled properly. Handle the bellows by the convolutions.
The alignment of the bellows is important. Improper alignment may lead to premature failure of the bellows. Misalignment can be identified by visually inspecting the convolutions for uniformity of compression.Inspect the bellows for damage prior to installation. If there is any damage to the convolutions, discard the bellows. Minor damage to the ends of the bellows may be repaired. However, if there is any difficulty in installation after the repair, discard the bellows.
Illustration 1 g01120233
Right side of engine, typical view (1) Torque for band clamp ... 12 4 N m (106 35 lb in) (2) Air inlet elbowNote: Refer to illustration 1 for the correct orientation of the clamp for the air inlet elbow.