STICK AR-HOE 1231518 - Caterpillar

Illustration 8 g06289304
(W) Fitting
(X) Fitting
Use the 7/8 static torque wrench of 70 N m (52 lb ft) to verify the torque on the fittings (X).Use 15/16 static torque wrench of 45 N m (33 lb ft) to check the black and yellow top fittings (W).Angle Blade Static Check for 305/305.5
Visually verify that the fittings and hoses are marked, and have broken torque marks.
Illustration 9 g06289305
(Y) Hose
(Z) Fitting
(AA) Fitting
Use the 5/8 static torque wrench of 20 N m (177 lb in) to verify the torque on the fittings (Z).Use the 11/16 static torque wrench of 19 N m (168 lb in) to verify the torque on the middle fittings (AA).Use 3/4 static torque wrench of 19 N m (168 lb in) to verify the torque on the hoses (Y). (use 9/16 backup wrench).Static Check for 303.5/304
Use the following torque values to ensure the static torque of the swivel joint.Note: If equipped with an angle blade, refer to "Angle Blade Static Check for 303.5/304".
Visually verify that the fittings and hoses are marked, and have broken torque marks.
Illustration 10 g06289306
(AB) Fitting
(AC) Hose
(AD) Hose
Use the 11/16 static torque wrench of 40 N m (29 lb ft) to verify the torque on the fittings (AB).Use 11/16 static torque wrench of 19 N m (168 lb in) (AC) on 303.5 models or 3/4 static torque wrench of 19 N m (168 lb in) (AD) on 304 models to verify the torque on the hoses.
Illustration 11 g06289307
(AE) Hose
(AF) Fitting
Use the 15/16 static torque wrench of 70 N m (52 lb ft) to verify the torque on the fittings (AF).Use 15/16 static torque wrench of 45 N m (33 lb ft) to verify the torque on the hoses (AE).
Illustration 12 g06289308
(AG) Fitting
(AH) Hose
Use the 5/8 static torque wrench of 23 N m (203 lb in) to verify the torque on the fittings (AG).Use the 11/16 static torque wrench of 19 N m (168 lb in) to verify the torque on the hoses (AH).Note: Use the 9/16 backup wrench while checking the torque of 11/16 inch hoses.
Illustration 13 g06289309
(AJ) Fitting
(AK) Hose
Use the 3/4 static torque wrench of 40 N m (29 lb ft) to verify the torque on the fittings (AJ).Use the 13/16 static torque wrench of 30 N m (265 lb in) to verify the torque on the hoses (AK).Note: Use the 11/16 backup wrench while checking the torque of 13/16 inch hoses.
Illustration 14 g06289310
(AL) Fitting
(AM) Fitting
(AN) Fitting
Use the 3/4 static torque wrench of 40 N m (29 lb ft) to verify the torque on the fittings (AN).Use the 7/8 static torque wrench of 70 N m (52 lb ft) to verify the torque on the bottom fittings (AL).Use 15/16 static torque wrench of 51 N m (38 lb ft) to verify the torque on the black fittings (AM).
Illustration 15 g06289311
(AP) Fitting
(AR) Fitting
Use the 13/16 static torque wrench of 34 N m (301 lb in) to verify the torque on the fitting (AP).Use 15/16 static torque wrench of 70 N m (52 lb ft) to verify the torque on the fittings (AR).Note: Use the