STICK GP 1795284 - Caterpillar

Illustration 1 g01240330
Component LocationThe following components are part of the generator system:
Generator control panel (A)
Circuit breaker panel, generator motor, and generator (B)
Generator control switch (C)
Generator circuit breaker (D)
Generator valve and generator pump (E) Front of Center Console
Illustration 2 g01240357
Front of Center Console (1) Generator circuit breakerGenerator circuit breaker (1) is located on the circuit breaker panel. This panel is located on the front of the center console. Decals on the panel identify the function of each circuit breaker.Generator circuit breaker (1`) receives power when the main power relay is energized. The generator circuit breaker transfers power to contact "2" of the generator control switch.Generator Circuit Breakers
Illustration 3 g01240370
Generator Circuit Breakers (2) Main circuit breaker for auxiliary power panel (non GFCI) (3) Left screed extension heating element (GFCI circuit breaker) (4) Left main screed heating element (GFCI circuit breaker) (5) Right main screed heating element (GFCI circuit breaker) (6) Right screed extension heating element (GFCI circuit breaker)The generator circuit breaker panel is located on top of the generator circuit breakers generator set, under a hinged access panel.The panel contains the following circuit breakers:
Main circuit breaker (2)
Circuit breaker (3) for the heating element on the left screed extension
Circuit breaker (4) for the heating element on the left main screed plate
Circuit breaker (5) for the heating element on the right main screed plate
Circuit breaker (6) for the heating element on the right screed extensionMain circuit breaker (2) protects the entire auxiliary electrical system. Circuit breaker (3), circuit breaker (4), circuit breaker (5), and circuit breaker (6) are ground fault protected devices. These circuit breakers are used when the machine is equipped with an electric screed heater. Main circuit breaker (2) protects the entire auxiliary electrical system. Circuit breaker (3), circuit breaker (4), circuit breaker (5), and circuit breaker (6) are ground fault protected devices. These circuit breakers are used when the machine is equipped with an electric screed heater.Auxiliary Power Panel
Illustration 4 g01240377
Auxiliary Power Panel (7) 120 volt outlets (8) 240 volt outlets (9) Non GFCI circuit breaker for left 120 volt outlet (10) Non GFCI circuit breaker for right 120 volt outlet (11) GFCI circuit breaker for left 240 volt outlet (12) GFCI circuit breaker for right 240 volt outletThe auxiliary power panel is located to the right of center console. This panel is equipped with two 120 volt, 20 amp outlets (7) and two 240 volt 20 amp outlets (8). These outlets are ground fault protected.The panel is equipped with single circuit breakers (9) and (10) for each 120 volt outlets (7). The panel is also equipped with single circuit breakers (11) and (12) for each 240 volt outlet (8). The circuit breakers are three-position switches. The top position is the ON position. The bottom position is the OFF position. The center position is the TRIPPED position. When a circuit breaker has been tripped, the circuit breaker switch must be moved to the OFF position and then returned to the ON position in order to reset the breaker.