STICK AS 2041109 - Caterpillar

Remove cartridge assembly (63) .
Remove seal connector (65) and the cap assembly.
Remove plug (64) . Repeat for the remaining plugs.
Illustration 22 g01400009
Remove O-ring seal (66) from plug (64) . Repeat for the remaining plugs.
Illustration 23 g01400055
Remove O-ring seal (68) from seal connector (65) . Remove screen assembly (67) .
Illustration 24 g01400058
Note: A ball is released when adapter assembly (70) and cage (69) are separated. See illustration 28 for a photo.
Separate adapter (70) from cage (69) .
Illustration 25 g01400063
Illustration 26 g01400066
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove retaining ring (72) and retainer (74) .
Remove plunger (73) and spring (75) from adapter (71) .
Remove O-ring seals (76) and (77) .
Illustration 27 g01400069
Illustration 28 g01400071
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Compress spring (80) and remove retainers (79) and ball (81) . Remove spring (80) from spool (78) .
Illustration 29 g01400074
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: Use the flats of cage (69) to remove stop (84) .
Remove stop (84) and spring (82) .
Remove O-ring seal (83) .
Illustration 30 g01400077
Remove O-ring seals (85) .
Remove spool (78) .
Illustration 31 g01400078
Illustration 32 g01398230
Use a suitable allen wrench and the flats of spool (78) in order to remove orifice (86) .
Repeat Steps 36 through 45 for the remaining cartridge assemblies.