STICK GP-HOE 2082110 - Caterpillar

Illustration 1 g03423038
Table 1
Specification for 239-8211 Track Idler Gp    
Item     Qty     Part     Specification Description    
1     2     7F-8267 O-Ring Seal     Lubricate the bore lightly with the lubricant that is being sealed.    
2     2     271-5950 Bearing     Apply Loctite Nickel Anti Seize to the inside diameter of the bearing.    
3     2     148-3533 Duo-Cone Seal Gp     The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Just before assembly, apply a thin layer of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.    
4     1     248-5327 Shaft     Apply Loctite Nickel Anti Seize to the surfaces on both ends.    
-     -     -     Minimum end play in the axial direction is 0.27 mm (0.011 inch).
Maximum end play in the axial direction is
1.55 mm (0.061 inch).