STICK AS-BRG& 2255660 - Caterpillar

Illustration 1 g06289465
Remove cover (1).
Illustration 2 g06293649
Disconnect harness assemblies (2). Disconnect harness assembly (3) and cable assembly (4). Remove bolt (5).
Illustration 3 g06289956
Remove access door (6).
Illustration 4 g06289993
Remove all bolts (8) and the brackets that secure bracket assembly (7) to the machine. Use two people to remove bracket assembly (7). The weight of bracket assembly (7) is approximately 30 kg (66 lb).
Illustration 5 g06293653
Turn fuel valves (9) to the OFF position.
Illustration 6 g06289598
Disconnect hose assemblies (10). Loosen the clamps and disconnect hoses (11).
Illustration 7 g06290081
Disconnect ground strap (12) from under the rear side of the cab.
Illustration 8 g06290373
Illustration 9 g06290375
Remove nuts (14). Position brake control valve (13) out of the way.
Illustration 10 g06290405
Disconnect hose assemblies (15).
Illustration 11 g06290487
Attach Tooling (A) and a suitable lifting device to cab (16). The weight of cab (16) is approximately 1597 kg (3520 lb).
Illustration 12 g06290519
Remove bolt (19), the small washer, large washer (18), and rubber (17) from the front, right side cab mount. Repeat for opposite side.
Illustration 13 g06290549
Remove the bolts and use two people to remove bracket assembly (20). The weight of bracket assembly (20) is approximately 27 kg (60 lb).
Illustration 14 g06291354
Remove bolt (23), the washer, large washer (22), and rubber (21).
Repeat Step 14 and Step 15 for the other side of the machine.
Illustration 15 g06290487
Use Tooling (A) and a suitable lifting device to remove cab (16).Installation Procedure
Install cab (16) in the reverse order of removal.
Tighten the bolts for harness assemblies (2) to a torque of 6 1 N m (53 9 lb in).