AVSPARE.COM
parts catalog

STICK & BEARING AS 2444160 - Caterpillar


2444160 STICK & BEARING AS Caterpillar parts 385B, 385C, 385C L
Rating:
69
Alternative (cross code) number:
CA2444160
244-4160
2444160
Caterpillar 2444160 STICK & BEARING AS
Weight: 6360 pounds 2884 kg.

Buy STICK & BEARING AS 2444160 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2444160:

EXCAVATOR  385B   385C   385C L   Caterpillar
Number on catalog scheme: 9
 
  For full view, you need register

Information:

Note: O-ring seals should always be replaced. A used O-ring seal may not have the same sealing properties as a new O-ring seal. A reconditioning procedure should not be degraded because of a low cost component such as an O-ring seal. Use 1U-6396 O-Ring Assembly Compound during the assembly procedure.
Illustration 1 g00477697
Illustration 2 g00681710
Install Tooling (A) to the location of the mirror. Install Tooling (C) to implement pump (13). Use straps and Tooling (B) in order to place the implement pump into position.
The weight of the implement pump is approximately 47 kg (103 lb).
Illustration 3 g00681828
Install the washers and bolts (18) in order to secure implement pump (1) . Tighten bolts (18) to a torque of 240 40 N m (177 30 lb ft).
Remove the straps, Tooling (B), and Tooling (A) from the location of the mirror. Remove Tooling (C) from the implement pump.
Illustration 4 g00681811
Illustration 5 g00681742
Install the O-ring seal to the fitting. Install fitting (17) to the hydraulic drive pump on the left side of the machine.
Install the O-ring seals to tube assembly (14). Connect the tube assembly to elbow (16) on the hydraulic drive pump on the right side of the machine.
Connect tube assembly (14) to fitting (15) .
Illustration 6 g00681681
Install the O-ring seal in hose assembly (12). Connect hose assembly (12) .
Illustration 7 g00681618
Connect hose (10) to the implement pump with half flanges (11), the washers and bolts (9). Tighten bolts (9) to a torque of 100 20 N m (74 15 lb ft).
Illustration 8 g00681616
Install O-ring seal (8) to elbow (7) .
Illustration 9 g00681564
Illustration 10 g00681592
Install elbow (7) to hose (4) .
Install elbow (7) to the implement pump with half flanges (5), the washers, and bolts (6). Tighten bolts (6) to a torque of 240 40 N m (177 30 lb ft).
Install clamp (3) on hose (4). Tighten the clamp.
Illustration 11 g00681550
Illustration 12 g00681543
Install the O-ring seal to tube assembly (1). Connect tube assembly (1) .
Install the O-ring seal to tube assembly (2). Connect tube assembly (2) to the elbow.
Fill the hydraulic tank. The capacity of the hydraulic tank is approximately 60 L (15.9 US gal). Refer to Operation and Maintenance Manual, SEBU7273, "Hydraulic System Oil - Change" for the proper draining procedure.End By:
Install the steering control. Refer to Disassembly and Assembly, "Steering Control - Remove and Install" for the correct procedure.
Install the floorplates. Refer to Disassembly and Assembly, "Floorplates - Remove and Install" for the correct procedure.
Install the mirror. Refer to Disassembly and Assembly, "Mirror - Remove and Install" for the correct procedure.

Caterpillar parts catalog:

Caterpillar parts catalog
385B & 385B L Excavators CLS00001-UP (MACHINE) POWERED BY 3456 Engine
385B & 385B L Excavators BKF00001-UP (MACHINE) POWERED BY 3456 Engine
385B Excavator MYA00001-UP (MACHINE) POWERED BY 3456 Engine
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
385C L Excavator JCM00001-UP (MACHINE) POWERED BY C-18 Engine
385C Excavator KBC00001-UP (MACHINE) POWERED BY C18 Engine
385C L Excavator T2E00001-UP (MACHINE) POWERED BY C-18 Engine
385C L Excavator EDA00001-UP (MACHINE) POWERED BY C18 Engine
385C Excavator MNZ00001-UP (MACHINE) POWERED BY C-18 Engine
385C & 385C L Excavator KGB00001-UP (MACHINE) POWERED BY C18 Engine


Parts stick Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.