parts catalog

STICK GP-LOWER 2559916 - Caterpillar

2559916 STICK GP-LOWER Caterpillar parts STICK
Alternative (cross code) number:
Caterpillar 2559916 STICK GP-LOWER

Buy STICK GP-LOWER 2559916 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Bucket Positioner - Tilt Adjustment
Use caution to avoid possible personal injury when adjusting the bucket positioner.Stop the engine and lower all equipment to relieve the hydraulic pressure.Apply the parking brake.Keep unauthorized personnel off the machine.
1. Position the bucket at the desired angle on the ground. 2. Stop the engine. 3. Loosen the clamp bolts and move the rod until the red tip shows at the end of the tube. 4. Tighten the clamp bolts. 5. Test the adjustment with a full load in the bucket.Lift Kickout
Use caution to avoid possible personal injury when adjusting the bucket lift kickout.Keep personnel off the machine. Clear the area when working under or around the bucket linkage.With the bucket raised, proper support must be provided for the bucket and/or the linkage.
1. Start the engine. Raise the bucket to the desired height and stop the engine.2. Block the bucket and the linkage. 3. Loosen the magnet clamp. Align the magnet with the switch assembly. 4. Move the magnet forward away from the switch to increase or back toward the switch to decrease the bucket lift kickout height.5. Tighten the clamp.6. To check the adjustment, start the engine and move the implement lift control to the RAISE position.Tracks
If tracks are too tight or loose, wear of components is accelerated. If they appear too tight or too loose, adjust the track. Follow the procedures in the "Maintenance Section" for adjustment.
Ripper Tips
Replace ripper tips before wear occurs on the shank. Follow the procedures in the "Maintenance Section" for replacement.Cutting Edges and Teeth
Have the cutting edges and teeth replaced before wear on the bucket structure occurs.

Parts stick Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.