STICK GP-HOE 2718668 - Caterpillar

GPS z: Measure the distance from the top of the lower housing (48) of the GNSS Receiver (10) to the bottom of the wheels.
Bucket Width: Measure the width of the machine from the outside edges of the bucket.
Wheelbase: Measure the distance from the center of the front axle to the center of the rear axle.
Maximum Reach: Measure the distance from the center of the front axle to the front edge of the bucket.
Wheel Radius: Measure the distance from the center of one of the wheels to the outside edge the same wheel.
Bench Height: Use the site-specific bench height.
Provide the measurements to the site coordinator. The site