3V9760 STICK AND BEARING ASSEM. Caterpillar parts
225
Rating:
Alternative (cross code) number:
CA3V9760
3V-9760
3V9760
CA3V9760
3V-9760
3V9760
Weight: 1300 pounds 589 kg.
EXCAVATOR,
Compatible equipment models: 3V9760:
Number on catalog scheme:
5
For full view, you need register
Information:
The relay status indicators are on the bottom of the lower display. When a GSC+ relay is activated, the corresponding indicator (K1, K2, etc) is shown on lower display (6). When a relay is not activated, the corresponding indicator (K1, K2, etc) is not shown.Keypad
Illustration 18 g00395398
Keypad (7) Keypad (7) is used to control the information that is shown on upper display (5) and lower display (6). The seven keys have two sets of functions, normal functions and service functions. See the topic Systems Operation, "Service Mode" for a description of the service functions of the keys. The normal functions of the keys are described in the following paragraphs.Power Meter Key - This key controls the viewing of power meter information. This information is shown on the lower display. Pressing the key for at least five seconds causes all the power meter data to scroll once. The default power meter data then resumes scrolling. Pressing the key for five seconds will stop the scrolling of the power meter functions until the key is pressed again.AC Meter Key - The AC meter key controls the viewing of the AC parameters on the upper display. Pressing the key causes the display to show a different set of parameters.Engine Meter Key - This key controls the viewing of engine parameters on the lower display. Pressing the key stops the scrolling of engine conditions. The value for one particular engine condition will show continuously. The pointer flashes indicating that the scrolling is stopped. The scrolling of the engine conditions will resume when the engine meter key is pressed again.Lamp Test Key - Pressing this key performs a lamp test on the GSC+ and the optional alarm module. On the GSC+, the ten fault indicators are ON CONTINUOUSLY. Every segment of upper display (5) and lower display (6) are ON. On the optional alarm module, all of the indicators are ON and the horn sounds. When an operator presses the key for ten seconds, the lamp test function automatically turns off.Alarm Codes Key - If fault alarm indicator (4) is FLASHING, pressing this key causes upper display (5) to show the corresponding alarm fault code. Pressing the key again will resume the showing of the AC generator output information on the upper display (5). If fault alarm indicator (4) is OFF, this key has no function. For more information on alarm fault codes, see Systems Operation, "Fault Description".Exit Key - This key only functions when the GSC+ is in Service Mode. See Systems Operation, "Service Mode".Service Mode Key - Pressing this key causes the GSC+ to enter service mode. See Systems Operation, "Service Mode" for more information.Relays
Illustration 19 g00521482
Relay Module On Rear Of GSC+
Illustration 20 g00436699
Relays In Relay Module (1) Jumper blockThe relays are located in the relay module on the rear of the GSC+. The relays are permanently attached within the relay module. The relays are not removable. The entire relay module is replaced if a relay is faulty. For more information, see Schematics And
Illustration 18 g00395398
Keypad (7) Keypad (7) is used to control the information that is shown on upper display (5) and lower display (6). The seven keys have two sets of functions, normal functions and service functions. See the topic Systems Operation, "Service Mode" for a description of the service functions of the keys. The normal functions of the keys are described in the following paragraphs.Power Meter Key - This key controls the viewing of power meter information. This information is shown on the lower display. Pressing the key for at least five seconds causes all the power meter data to scroll once. The default power meter data then resumes scrolling. Pressing the key for five seconds will stop the scrolling of the power meter functions until the key is pressed again.AC Meter Key - The AC meter key controls the viewing of the AC parameters on the upper display. Pressing the key causes the display to show a different set of parameters.Engine Meter Key - This key controls the viewing of engine parameters on the lower display. Pressing the key stops the scrolling of engine conditions. The value for one particular engine condition will show continuously. The pointer flashes indicating that the scrolling is stopped. The scrolling of the engine conditions will resume when the engine meter key is pressed again.Lamp Test Key - Pressing this key performs a lamp test on the GSC+ and the optional alarm module. On the GSC+, the ten fault indicators are ON CONTINUOUSLY. Every segment of upper display (5) and lower display (6) are ON. On the optional alarm module, all of the indicators are ON and the horn sounds. When an operator presses the key for ten seconds, the lamp test function automatically turns off.Alarm Codes Key - If fault alarm indicator (4) is FLASHING, pressing this key causes upper display (5) to show the corresponding alarm fault code. Pressing the key again will resume the showing of the AC generator output information on the upper display (5). If fault alarm indicator (4) is OFF, this key has no function. For more information on alarm fault codes, see Systems Operation, "Fault Description".Exit Key - This key only functions when the GSC+ is in Service Mode. See Systems Operation, "Service Mode".Service Mode Key - Pressing this key causes the GSC+ to enter service mode. See Systems Operation, "Service Mode" for more information.Relays
Illustration 19 g00521482
Relay Module On Rear Of GSC+
Illustration 20 g00436699
Relays In Relay Module (1) Jumper blockThe relays are located in the relay module on the rear of the GSC+. The relays are permanently attached within the relay module. The relays are not removable. The entire relay module is replaced if a relay is faulty. For more information, see Schematics And