STICK GP-EXTENDABLE 9R9107 - Caterpillar

Illustration 55 g00325236
Install the two bolts (29) and the tee connection (30) .
Illustration 56 g00325235
If the two brackets (28) were removed, install the two brackets (28) in the original location.
Illustration 57 g00325234
Put the ring and the O-ring seal into position on the end of the tube (27) .
Put the tube into position. See Illustration 57.
Install the two clamp assemblies (26) .
Install the four bolts (25), washers, and spacers.
Illustration 58 g00325232
Install the two bolts (24) and washers.
Put the clamp (22) into position. Install the bolts (23), nuts, and washers.
Illustration 59 g00325231
Put the flange (20), orifice (18), and plate (21) into the correct position.
Put the two retainers (19) into position. Install the four bolts (17) and washers.
Illustration 60 g00325230
Put a new gasket (16) into position between the adapter (13) and the aftercooler cover assembly (15) .
Put the adapter (13) into position on the end of the aftercooler cover assembly (15). Install the eight bolts (14) and washers.
Illustration 61 g00325229
Put a new gasket (12) into position between the aftercooler housing (10) and the adapter (13) .
Put the aftercooler housing (10) into position. Install the eight bolts (11) and washers.
Illustration 62 g00325228
Put the air pipes (9) with the energized seals into position in the aftercooler housing (10) .
Illustration 63 g00325227
Put the tubes into position. See Illustration 63.
Illustration 64 g00325226
Install the bolts (7), nuts, and washers that connect the tubes (8) to the turbochargers.
Illustration 65 g00325225
Put the bracket (6) into position. Install the two bolts (5) and washers.
Illustration 66 g00325224
Install the four bolts (4) and washers.
Illustration 67 g00325223
Put new gaskets into position on the ends of the tube assembly (1) .
Put the tube assembly (1) into position. Install the four retainers (3), bolts (2) and washers.
Fill the system with coolant to the normal operating level.